Starting with IPfire on the RPi4B revision 1.5

[jon]

@edinburgh_wg

I’ve found this post (Raspberry Pi 4 Model B Rev 1.5 - error -5 whilst initialising SD card - #7 by wiesel ),

@wiesel is one person with revision 1.5. Hopefully he will respond.

---

EDIT:
see this post (and all of the posts above it):

Rpi4 and error -22

Dear, Fixed the issue at hand. I encountered the same issue (-22 bus width). Hardware: Rasp 4 rev 1.5 c03115 BCM 2835 boot from SD with Rasp OS, updated using APT & bootemi (although it was not necessary for me) changed the booti lines as described; Raspberry Pi 4 Model B Rev 1.5 - error -5 whilst initialising SD card - #7 by wiesel removed the file boot.scr!! Booted and worked for me!

also here are some searches I did.

for raspberry pi "1.5" :
https://community.ipfire.org/search?expanded=true&q=raspberry%20pi%20"1.5"%20order%3Alatest

search for rpi "1.5" :
https://community.ipfire.org/search?expanded=true&q=rpi%20%221.5%22%20order%3Alatest