SolidRun CN9130 based SOM ClearFog Pro

Hello,
I’m trying to set up IPFire on a SolidRun CN9130 based SOM ClearFog Pro, but unfortunately it hangs on Kernel startup:

Can anyone help me somehow to find a solution? or show me the way?

BootROM - 2.03
Starting CP-0 IOROM 1.07
Booting from SPI NOR flash 1 (0x32)
Found valid image at boot postion 0x000
lNOTICE:  Starting binary extension
NOTICE:  SVC: DEV ID: CN913x, FREQ Mode: 0x0
NOTICE:  SVC: AVS work point changed from 0x2e8 to 0x2de
w/o ecc; strap value=0
4GB capacity; strap value=0
mv_ddr: 14.0.0-gdf2c09c (Mar 21 2022 - 14:25:03)
SSCG_EN
Synopsys DDR43 PHY Firmware version: A-2017.11
SNPS DDR: 1D training passed
SNPS DDR: 2D training passed
SNPS DDR: training completed
dma memcmp pass
mv_ddr: completed successfully
NOTICE:  Cold boot
NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v2.3(release):v2.3-864-g6739b9b02 (Marvell-devel-18.12.0)
NOTICE:  BL1: Built : 14:25:03, Mar 21 2022
NOTICE:  BL1: Booting BL2
NOTICE:  BL2: v2.3(release):v2.3-864-g6739b9b02 (Marvell-devel-18.12.0)
NOTICE:  BL2: Built : 14:25:03, Mar 21 2022
NOTICE:  SCP_BL2 contains 7 concatenated images
NOTICE:  Skipping MG CP1 related image
NOTICE:  Load image to CP0 MG
NOTICE:  Loading MG image from address 0x403114c Size 0xe0f0 to MG at 0xf2100000
NOTICE:  Skipping MSS CP3 related image
NOTICE:  Skipping MSS CP2 related image
NOTICE:  Skipping MSS CP1 related image
NOTICE:  Load image to CP0 MSS AP0
NOTICE:  Loading MSS image from addr. 0x4044930 Size 0x1cfc to MSS at 0xf2280000
NOTICE:  Done
NOTICE:  Load image to AP0 MSS
NOTICE:  Loading MSS image from addr. 0x404662c Size 0x5400 to MSS at 0xf0580000
NOTICE:  Done
NOTICE:  BL1: Booting BL31
lNOTICE:  BL31: v2.3(release):v2.3-864-g6739b9b02 (Marvell-devel-18.12.0)
NOTICE:  BL31: Built : 14:25:03, Mar 21 2022


U-Boot 2019.10-10.0.0-00014-g359bde4792 (Mar 21 2022 - 14:25:01 +0000)

Model: SolidRun CN9130 based SOM ClearFog Pro
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
SoC: cn9130-A1; AP807-B0; CP115-A0
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
Clock:  CPU     2000 [MHz]
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
        DDR     1200 [MHz]
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
        FABRIC  1200 [MHz]
        MSS     200  [MHz]
LLC Enabled (Exclusive Mode)
DRAM:  4 GiB
Running in RAM - U-Boot at: 0x7fef1000
                 Env at:    0x7ff9c8e8
Comphy chip #0:
Comphy-0: SATA1
Comphy-1: USB3_HOST0
Comphy-2: SFI0          10.3125 Gbps
Comphy-3: SGMII1        1.25 Gbps
Comphy-4: PEX1
Comphy-5: PEX2
UTMI PHY 0 initialized to USB Host0
UTMI PHY 1 initialized to USB Host1
PCIE-0: Link down
PCIE-2: Link down
NAND:  0 MiB
MMC:   sdhci@6e0000: 0, sdhci@780000: 1
Loading Environment from SPI Flash...
Bus spi@700680 CS0 address is not set correct.
SF: Detected w25q64cv with page size 256 Bytes, erase size 4 KiB, total 8 MiB
*** Warning - bad CRC, using default environment

get_fdtfile_from_tlv_eeprom: could not identify carrier, defaulting to Clearfog Pro!
Net:
Error: mvpp2-0 address not set.

Error: mvpp2-0 address not set.

Error: mvpp2-1 address not set.

Error: mvpp2-2 address not set.
eth-1: mvpp2-0
Error: mvpp2-1 address not set.
, eth-1: mvpp2-1
Error: mvpp2-2 address not set.
, eth-1: mvpp2-2
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
2514 bytes read in 20 ms (122.1 KiB/s)
## Executing script at 06e00000
114 bytes read in 9 ms (11.7 KiB/s)
Load uEnv.txt...
...
Set console to ttyS0,115200n8
27826688 bytes read in 2474 ms (10.7 MiB/s)

15726232 bytes read in 1408 ms (10.7 MiB/s)
Ramdisk loaded...
Unknown command 'bootz' - try 'help'
## Loading init Ramdisk from Legacy Image at 09000000 ...
   Image Name:
   Created:      2022-06-05  17:42:03 UTC
   Image Type:   AArch64 Linux RAMDisk Image (lzma compressed)
   Data Size:    15726168 Bytes = 15 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
ERROR: Did not find a cmdline Flattened Device Tree
   Loading Ramdisk to 7e6d9000, end 7f5d8658 ... OK

Starting kernel ...

Hi,

welcome to the IPFire community. :slight_smile:

According to this wiki page, that device needs some extra steps to work properly with IPFire.

Thanks, and best regards,
Peter Müller

Hi Peter,
I bought the device thanks to that guide, confident of being able to follow it to install IPFire. Unfortunately I still have a lot to learn before I can.

First step no problem:

  • Download IPfire 2.27 core 168 ARM64
  • gunzip ipfire-2.27.2gb-ext4.aarch64-full-core168.img.xz
  • dd if=ipfire-2.27.2gb-ext4.aarch64-full-core168.img of=/dev/sdX conv=fsync bs=4M status=progress # flash image to SD card (my case. /dev/sdb)

Second step:

Third step (It’s ok with Serial Console):

setenv fdt_addr 0x8000000
setenv fdt_addr_r 0x8000000
setenv eth1addr XX:XX:XX:XX:XX:XX
setenv eth2addr XX:XX:XX:XX:XX:XX
setenv eth3addr XX:XX:XX:XX:XX:XX
saveenv

I use an already made u-boot u-boot-cn9130-cf-pro-mmc:1:X.bin

  • u-boot-cn9130-cf-pro-mmc:1:0.bin

and I use the file .dtb:

  • I copied the file cn9130-cf-pro.dtb from the Ubuntu 20.04 image that works and put it in the SD card at /dtb.5.15.35-ipfire/marvell/

====================================

So now the kernel start but I have new problem:

error extract:

setfont: putfont: 512,8x16:failed: -1
putfont: PIO_FONTX: Inappropriate ioctl for device
ap0_sd_vccq: disabling
cp0_sd_vccq: disabling


dracut Warning: Could not boot.
dracut Warning: Could not boot.

dracut Warning: /dev/disk/by-uuid/4a360415-161a-481d-843b-eb0e7a476d55 does not exist
dracut Warning: /dev/disk/by-uuid/4a360415-161a-481d-843b-eb0e7a476d55 does not exist

Complete boot…


BootROM - 2.03
Starting CP-0 IOROM 1.07
Booting from SD 0 (0x29)
SD - wait_for_sd_interrupt: Error interrupt -  00008000
SD - wait_for_sd_interrupt: Error interrupt status 00000003
SD - sd_get_cmd_response: Get command response failed.

SD - sd_init: Failed - ret = 00000081
Error: Failed initializing interface
Error: Failed boot attempt 01. error = 0x0C1

BootROM - 2.03
Starting CP-0 IOROM 1.07
Booting from SD 0 (0x29)
SD - wait_for_sd_interrupt: Error interrupt -  00008000
SD - wait_for_sd_interrupt: Error interrupt status 00000003
SD - sd_get_cmd_response: Get command response failed.

SD - sd_init: Failed - ret = 00000081
Error: Failed initializing interface
Found valid image at boot postion 0x000
lNOTICE:  Starting binary extension
NOTICE:  SVC: DEV ID: CN913x, FREQ Mode: 0x0
NOTICE:  SVC: AVS work point changed from 0x2e8 to 0x2de
w/o ecc; strap value=0
4GB capacity; strap value=0
mv_ddr: 14.0.0-g666afa1 (Jul 07 2022 - 19:38:16)
SSCG_EN
Synopsys DDR43 PHY Firmware version: A-2017.11
SNPS DDR: 1D training passed
SNPS DDR: 2D training passed
SNPS DDR: training completed
dma memcmp pass
mv_ddr: completed successfully
NOTICE:  Cold boot
NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v2.3(release):v2.3-864-gcb1856237 (Marvell-devel-18.12.0)
NOTICE:  BL1: Built : 19:38:16, Jul  7 2022
NOTICE:  BL1: Booting BL2
NOTICE:  BL2: v2.3(release):v2.3-864-gcb1856237 (Marvell-devel-18.12.0)
NOTICE:  BL2: Built : 19:38:16, Jul  7 2022
NOTICE:  SCP_BL2 contains 7 concatenated images
NOTICE:  Skipping MG CP1 related image
NOTICE:  Load image to CP0 MG
NOTICE:  Loading MG image from address 0x403114c Size 0xe0f0 to MG at 0xf2100000
NOTICE:  Skipping MSS CP3 related image
NOTICE:  Skipping MSS CP2 related image
NOTICE:  Skipping MSS CP1 related image
NOTICE:  Load image to CP0 MSS AP0
NOTICE:  Loading MSS image from addr. 0x4044930 Size 0x1cfc to MSS at 0xf2280000
NOTICE:  Done
NOTICE:  Load image to AP0 MSS
NOTICE:  Loading MSS image from addr. 0x404662c Size 0x5400 to MSS at 0xf0580000
NOTICE:  Done
NOTICE:  BL1: Booting BL31
lNOTICE:  BL31: v2.3(release):v2.3-864-gcb1856237 (Marvell-devel-18.12.0)
NOTICE:  BL31: Built : 19:38:16, Jul  7 2022


U-Boot 2019.10-10.0.0-00018-g15bfc87307 (Jul 07 2022 - 19:38:15 +0000)

Model: SolidRun CN9130 based SOM ClearFog Pro
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
SoC: cn9130-A1; AP807-B0; CP115-A0
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
Clock:  CPU     2000 [MHz]
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
        DDR     1200 [MHz]
ERROR:   mrvl_sip_smc_handler: unhandled SMC (0x82000014)
        FABRIC  1200 [MHz]
        MSS     200  [MHz]
LLC Enabled (Exclusive Mode)
DRAM:  4 GiB
Running in RAM - U-Boot at: 0x7fef0000
                 Env at:    0x7ff9c1ef
Comphy chip #0:
Comphy-0: SATA1
Comphy-1: USB3_HOST0
Comphy-2: SFI0          10.3125 Gbps
Comphy-3: SGMII1        1.25 Gbps
Comphy-4: PEX1
Comphy-5: PEX2
UTMI PHY 0 initialized to USB Host0
UTMI PHY 1 initialized to USB Host1
PCIE-0: Link down
PCIE-2: Link down
NAND:  0 MiB
MMC:   sdhci@6e0000: 0, sdhci@780000: 1
Loading Environment from MMC... OK
get_fdtfile_from_tlv_eeprom: could not identify carrier, defaulting to Clearfog Pro!
Net:
Warning: mvpp2-0 (eth0) using random MAC address - 2e:3b:41:11:be:39
eth0: mvpp2-0 [PRIME], eth1: mvpp2-1, eth2: mvpp2-2
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
2514 bytes read in 20 ms (122.1 KiB/s)
## Executing script at 06e00000
114 bytes read in 8 ms (13.7 KiB/s)
Load uEnv.txt...
...
Set console to ttyS0,115200n8
27826688 bytes read in 2472 ms (10.7 MiB/s)
24152 bytes read in 37 ms (636.7 KiB/s)

15726232 bytes read in 1407 ms (10.7 MiB/s)
Ramdisk loaded...
Unknown command 'bootz' - try 'help'
## Loading init Ramdisk from Legacy Image at 09000000 ...
   Image Name:
   Created:      2022-06-05  17:42:03 UTC
   Image Type:   AArch64 Linux RAMDisk Image (lzma compressed)
   Data Size:    15726168 Bytes = 15 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 08000000
   Booting using the fdt blob at 0x8000000
   Loading Ramdisk to 7e6d8000, end 7f5d7658 ... OK
   Loading Device Tree to 000000007e6cf000, end 000000007e6d7e57 ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Linux version 5.15.35-ipfire (root@arm64-01.zrh.ipfire.org) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.37) #1 SMP Sun Jun 5 17:34:40 GMT 2022
Machine model: SolidRun CN9130 based SOM Clearfog Pro
efi: UEFI not found.
Zone ranges:
  DMA      [mem 0x0000000000000000-0x00000000ffffffff]
  DMA32    empty
  Normal   [mem 0x0000000100000000-0x000000013fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000000003ffffff]
  node   0: [mem 0x0000000004000000-0x00000000041fffff]
  node   0: [mem 0x0000000004200000-0x00000000bfffffff]
  node   0: [mem 0x0000000100000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000013fffffff]
cma: Reserved 24 MiB at 0x00000000be800000
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 27 pages/cpu s72088 r8192 d30312 u110592
Detected PIPT I-cache on CPU0
CPU features: detected: Spectre-v2
CPU features: detected: Spectre-BHB
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Built 1 zonelists, mobility grouping on.  Total pages: 1032192
Kernel command line: console=ttyS0,115200n8 root=UUID=4a360415-161a-481d-843b-eb0e7a476d55 rootwait
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
software IO TLB: mapped [mem 0x00000000ba800000-0x00000000be800000] (64MB)
Memory: 3975448K/4194304K available (13760K kernel code, 2662K rwdata, 5324K rodata, 5312K init, 793K bss, 194280K reserved, 24576K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x2c/0x770 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 38979 entries in 153 pages
ftrace: allocated 153 pages with 4 groups
trace event string verifier disabled
rcu: Hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
        Rude variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GIC: Adjusting CPU interface base to 0x00000000f022f000
Root IRQ handler: gic_handle_irq
GIC: Using split EOI/Deactivate mode
GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
arch_timer: cp15 timer(s) running at 25.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=25000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
rcu: Hierarchical SRCU implementation.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected PIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Detected PIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
Detected PIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: 32-bit EL1 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
Serial: AMBA PL011 UART driver
cryptd: max_cpu_qlen set to 1000
ACPI: Interpreter disabled.
ap0_sd_vccq: Bringing 3300000uV into 1800000-1800000uV
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI: disabled
NET: Registered PF_INET protocol family
IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
kvm [1]: IPA Size Limit: 44 bits
kvm [1]: vgic interrupt IRQ9
kvm [1]: Hyp mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=20 bucket_order=0
NET: Registered PF_ALG protocol family
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
printk: console [ttyS0] disabled
f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 16, base_baud = 12500000) is a 16550A
Freeing initrd memory: 15356K
printk: console [ttyS0] enabled
Serial: AMBA driver
omap_rng f2760000.trng: Random Number Generator ver. 203b34c
random: fast init done
random: crng init done
brd: module loaded
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-orion: EHCI orion driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Bridge firewalling registered
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'IPFire.org: Build time autogenerated kernel key: fa51cf7910f8cdade2234b33fd64e85722f24992'
hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
gpio-59 (phy_reset): hogged as output/high
input: keys as /devices/platform/keys/input/input0
Freeing unused kernel memory: 5312K
Checked W+X mappings: passed, no W+X pages found
Run /init as init process
dracut: IPFire-2
udevd[275]: starting eudev-3.2.6
dracut: rd.md=0: removing MD RAID activation
xhci-hcd f2500000.usb3: xHCI Host Controller
xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1
xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
xhci-hcd f2500000.usb3: irq 32, io mem 0xf2500000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
mcp3021 0-004c: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
ahci f2540000.sata: supply ahci not found, using dummy regulator
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
usb usb1: SerialNumber: f2500000.usb3
hub 1-0:1.0: USB hub found
ahci f2540000.sata: supply phy not found, using dummy regulator
hub 1-0:1.0: 1 port detected
systemd-udevd[326]: ignoring invalid mode '@DEV_KVM_MODE@'
platform f2540000.sata:sata-port@0: supply target not found, using dummy regulator
platform f2540000.sata:sata-port@1: supply target not found, using dummy regulator
ahci f2540000.sata: masking port_map 0x3 -> 0x3
xhci-hcd f2500000.usb3: xHCI Host Controller
ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2
xhci-hcd f2500000.usb3: Host supports USB 3.0 SuperSpeed
ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
usb usb2: SerialNumber: f2500000.usb3
scsi host0: ahci
hub 2-0:1.0: USB hub found
scsi host1: ahci
hub 2-0:1.0: 1 port detected
ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 33
xhci-hcd f2510000.usb3: xHCI Host Controller
ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 33
xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3
xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
xhci-hcd f2510000.usb3: irq 34, io mem 0xf2510000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
usb usb3: SerialNumber: f2510000.usb3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f2510000.usb3: xHCI Host Controller
xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4
xhci-hcd f2510000.usb3: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
usb usb4: SerialNumber: f2510000.usb3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
setfont: putfont: 512,8x16:failed: -1
putfont: PIO_FONTX: Inappropriate ioctl for device
ap0_sd_vccq: disabling
cp0_sd_vccq: disabling


dracut Warning: Could not boot.
dracut Warning: Could not boot.

dracut Warning: /dev/disk/by-uuid/4a360415-161a-481d-843b-eb0e7a476d55 does not exist
dracut Warning: /dev/disk/by-uuid/4a360415-161a-481d-843b-eb0e7a476d55 does not exist

Generating "/run/initramfs/rdsosreport.txt"
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.

To get more debug information in the report,
reboot with "rd.debug" added to the kernel command line.

Dropping to debug shell.

thanks for your patience.

  • carry under the file /run/initramfs/rdsosreport.txt
dracut:/# cat /run/initramfs/rdsosreport.txt
+ cat /lib/dracut/dracut-056
dracut-056
+ echo /proc/cmdline
/proc/cmdline
+ sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /proc/cmdline
console=ttyS0,115200n8 root=UUID=4a360415-161a-481d-843b-eb0e7a476d55 rootwait
+ '[' -f /etc/cmdline ']'
+ for _i in /etc/cmdline.d/*.conf
+ '[' -f '/etc/cmdline.d/*.conf' ']'
+ break
+ cat /proc/self/mountinfo
1 1 0:2 / / rw - rootfs none rw
18 1 0:17 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw
19 1 0:18 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw
20 1 0:5 / /dev rw,nosuid,noexec - devtmpfs devtmpfs rw,size=1987724k,nr_inodes=496931,mode=755
21 20 0:19 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,gid=5,mode=620,ptmxmode=000
22 20 0:20 / /dev/shm rw,nosuid,nodev,noexec - tmpfs tmpfs rw
23 1 0:21 / /run rw,nosuid,nodev,noexec - tmpfs tmpfs rw,mode=755
+ cat /proc/mounts
none / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
devtmpfs /dev devtmpfs rw,nosuid,noexec,size=1987724k,nr_inodes=496931,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /run tmpfs rw,nosuid,nodev,noexec,mode=755 0 0
+ blkid
+ blkid -o udev
+ ls -l '/dev/disk/by*'
ls: cannot access '/dev/disk/by*': No such file or directory
+ for _i in /etc/conf.d/*.conf
+ '[' -f '/etc/conf.d/*.conf' ']'
+ break
+ command -v lvm
+ lvm pvdisplay
File descriptor 9 (/.console_lock) leaked on lvm invocation. Parent PID 2950: /bin/sh
  WARNING: Failed to connect to lvmetad. Falling back to device scanning.
+ lvm vgdisplay
File descriptor 9 (/.console_lock) leaked on lvm invocation. Parent PID 2950: /bin/sh
  WARNING: Failed to connect to lvmetad. Falling back to device scanning.
+ lvm lvdisplay
File descriptor 9 (/.console_lock) leaked on lvm invocation. Parent PID 2950: /bin/sh
  WARNING: Failed to connect to lvmetad. Falling back to device scanning.
+ command -v dmsetup
+ dmsetup ls --tree
No devices found
+ cat /proc/mdstat
Personalities :
unused devices: <none>
+ command -v ip
+ command -v journalctl
+ dmesg
+ sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g'
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.15.35-ipfire (root@arm64-01.zrh.ipfire.org) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.37) #1 SMP Sun Jun 5 17:34:40 GMT 2022
[    0.000000] Machine model: SolidRun CN9130 based SOM Clearfog Pro
[    0.000000] efi: UEFI not found.
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000]   node   0: [mem 0x0000000004000000-0x00000000041fffff]
[    0.000000]   node   0: [mem 0x0000000004200000-0x00000000bfffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] cma: Reserved 24 MiB at 0x00000000be800000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 27 pages/cpu s72088 r8192 d30312 u110592
[    0.000000] pcpu-alloc: s72088 r8192 d30312 u110592 alloc=27*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=UUID=4a360415-161a-481d-843b-eb0e7a476d55 rootwait
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000ba800000-0x00000000be800000] (64MB)
[    0.000000] Memory: 3975448K/4194304K available (13760K kernel code, 2662K rwdata, 5324K rodata, 5312K init, 793K bss, 194280K reserved, 24576K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x2c/0x770 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 38979 entries in 153 pages
[    0.000000] ftrace: allocated 153 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
[    0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
[    0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
[    0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
[    0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
[    0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.000206] Console: colour dummy device 80x25
[    0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=25000)
[    0.000236] pid_max: default: 32768 minimum: 301
[    0.000280] LSM: Security Framework initializing
[    0.000337] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000355] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.001222] rcu: Hierarchical SRCU implementation.
[    0.001567] EFI services will not be available.
[    0.001694] smp: Bringing up secondary CPUs ...
[    0.002161] Detected PIPT I-cache on CPU1
[    0.002196] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.002691] Detected PIPT I-cache on CPU2
[    0.002715] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[    0.003216] Detected PIPT I-cache on CPU3
[    0.003234] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[    0.003273] smp: Brought up 1 node, 4 CPUs
[    0.003283] SMP: Total of 4 processors activated.
[    0.003286] CPU features: detected: 32-bit EL0 Support
[    0.003288] CPU features: detected: 32-bit EL1 Support
[    0.003292] CPU features: detected: CRC32 instructions
[    0.013072] CPU: All CPU(s) started at EL2
[    0.013104] alternatives: patching kernel code
[    0.013876] devtmpfs: initialized
[    0.015548] Registered cp15_barrier emulation handler
[    0.015557] Registered setend emulation handler
[    0.015621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.015642] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.015963] pinctrl core: initialized pinctrl subsystem
[    0.016201] DMI not present or invalid.
[    0.016392] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.017815] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.018097] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.018454] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.018811] thermal_sys: Registered thermal governor 'fair_share'
[    0.018814] thermal_sys: Registered thermal governor 'step_wise'
[    0.018817] thermal_sys: Registered thermal governor 'user_space'
[    0.019077] cpuidle: using governor menu
[    0.019130] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.019185] ASID allocator initialised with 65536 entries
[    0.019276] Serial: AMBA PL011 UART driver
[    0.437174] cryptd: max_cpu_qlen set to 1000
[    0.442538] ACPI: Interpreter disabled.
[    0.443082] ap0_sd_vccq: Bringing 3300000uV into 1800000-1800000uV
[    0.443487] iommu: Default domain type: Translated
[    0.443491] iommu: DMA domain TLB invalidation policy: strict mode
[    0.443609] vgaarb: loaded
[    0.443791] SCSI subsystem initialized
[    0.443863] libata version 3.00 loaded.
[    0.443938] usbcore: registered new interface driver usbfs
[    0.443966] usbcore: registered new interface driver hub
[    0.443981] usbcore: registered new device driver usb
[    0.444877] clocksource: Switched to clocksource arch_sys_counter
[    0.453788] VFS: Disk quotas dquot_6.6.0
[    0.453824] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.454008] pnp: PnP ACPI: disabled
[    0.456696] NET: Registered PF_INET protocol family
[    0.456832] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.457799] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.457910] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.458115] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.458317] TCP: Hash tables configured (established 32768 bind 32768)
[    0.458397] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.458454] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.458562] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.458579] PCI: CLS 0 bytes, default 64
[    0.458790] Trying to unpack rootfs image as initramfs...
[    0.468494] kvm [1]: IPA Size Limit: 44 bits
[    0.469254] kvm [1]: vgic interrupt IRQ9
[    0.469333] kvm [1]: Hyp mode initialized successfully
[    0.470008] Initialise system trusted keyrings
[    0.470130] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.491936] NET: Registered PF_ALG protocol family
[    0.491952] Key type asymmetric registered
[    0.491956] Asymmetric key parser 'x509' registered
[    0.492011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.492078] io scheduler mq-deadline registered
[    0.492083] io scheduler kyber registered
[    0.492146] io scheduler bfq registered
[    0.494931] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
[    0.495323] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
[    0.499047] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.499663] printk: console [ttyS0] disabled
[    0.519797] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 16, base_baud = 12500000) is a 16550A
[    0.642414] Freeing initrd memory: 15356K
[    0.643414] printk: console [ttyS0] enabled
[    1.171320] Serial: AMBA driver
[    1.173711] omap_rng f2760000.trng: Random Number Generator ver. 203b34c
[    1.173962] random: fast init done
[    1.181360] random: crng init done
[    1.184498] brd: module loaded
[    1.188534] loop: module loaded
[    1.194753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.200028] ehci-pci: EHCI PCI platform driver
[    1.203212] ehci-platform: EHCI generic platform driver
[    1.207204] ehci-orion: EHCI orion driver
[    1.209967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.214874] ohci-pci: OHCI PCI platform driver
[    1.218047] ohci-platform: OHCI generic platform driver
[    1.222031] uhci_hcd: USB Universal Host Controller Interface driver
[    1.227241] usbcore: registered new interface driver uas
[    1.231291] usbcore: registered new interface driver usb-storage
[    1.236102] mousedev: PS/2 mouse device common for all mice
[    1.241710] device-mapper: uevent: version 1.0.3
[    1.245159] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    1.252552] sdhci: Secure Digital Host Controller Interface driver
[    1.257461] sdhci: Copyright(c) Pierre Ossman
[    1.260531] Synopsys Designware Multimedia Card Interface Driver
[    1.265477] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.270022] ledtrig-cpu: registered to indicate activity on CPUs
[    1.274960] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    1.280179] hid: raw HID events driver (C) Jiri Kosina
[    1.284194] usbcore: registered new interface driver usbhid
[    1.288485] usbhid: USB HID core driver
[    1.291701] Initializing XFRM netlink socket
[    1.294837] NET: Registered PF_INET6 protocol family
[    1.303136] Segment Routing with IPv6
[    1.305540] In-situ OAM (IOAM) with IPv6
[    1.308238] NET: Registered PF_PACKET protocol family
[    1.312034] Bridge firewalling registered
[    1.314818] Key type dns_resolver registered
[    1.318076] registered taskstats version 1
[    1.320897] Loading compiled-in X.509 certificates
[    1.329704] Loaded X.509 cert 'IPFire.org: Build time autogenerated kernel key: fa51cf7910f8cdade2234b33fd64e85722f24992'
[    1.340678] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.348123] gpio-59 (phy_reset): hogged as output/high
[    1.352985] input: keys as /devices/platform/keys/input/input0
[    1.362649] Freeing unused kernel memory: 5312K
[    1.394631] Checked W+X mappings: passed, no W+X pages found
[    1.399046] Run /init as init process
[    1.401420]   with arguments:
[    1.401423]     /init
[    1.401426]   with environment:
[    1.401428]     HOME=/
[    1.401430]     TERM=linux
[    1.491720] dracut: IPFire-2
[    1.664514] udevd[275]: starting eudev-3.2.6
[    1.686024] dracut: rd.md=0: removing MD RAID activation
[    1.773974] xhci-hcd f2500000.usb3: xHCI Host Controller
[    1.779433] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1
[    1.787066] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    1.795437] xhci-hcd f2500000.usb3: irq 32, io mem 0xf2500000
[    1.800129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.800247] mcp3021 0-004c: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.807143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.818605] ahci f2540000.sata: supply ahci not found, using dummy regulator
[    1.823946] usb usb1: Product: xHCI Host Controller
[    1.823952] usb usb1: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
[    1.823955] usb usb1: SerialNumber: f2500000.usb3
[    1.824746] hub 1-0:1.0: USB hub found
[    1.829887] ahci f2540000.sata: supply phy not found, using dummy regulator
[    1.833432] hub 1-0:1.0: 1 port detected
[    1.842243] systemd-udevd[326]: ignoring invalid mode '@DEV_KVM_MODE@'
[    1.844607] platform f2540000.sata:sata-port@0: supply target not found, using dummy regulator
[    1.870239] platform f2540000.sata:sata-port@1: supply target not found, using dummy regulator
[    1.877861] ahci f2540000.sata: masking port_map 0x3 -> 0x3
[    1.879342] xhci-hcd f2500000.usb3: xHCI Host Controller
[    1.882427] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.886211] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2
[    1.886227] xhci-hcd f2500000.usb3: Host supports USB 3.0 SuperSpeed
[    1.893497] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.899753] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.918747] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.925767] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.931727] usb usb2: Product: xHCI Host Controller
[    1.935326] usb usb2: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
[    1.940150] usb usb2: SerialNumber: f2500000.usb3
[    1.944221] scsi host0: ahci
[    1.946254] hub 2-0:1.0: USB hub found
[    1.946976] scsi host1: ahci
[    1.948757] hub 2-0:1.0: 1 port detected
[    1.950479] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 33
[    1.953660] xhci-hcd f2510000.usb3: xHCI Host Controller
[    1.959607] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 33
[    1.970306] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3
[    1.976591] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    1.984578] xhci-hcd f2510000.usb3: irq 34, io mem 0xf2510000
[    1.989190] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.996190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.002138] usb usb3: Product: xHCI Host Controller
[    2.005729] usb usb3: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
[    2.010541] usb usb3: SerialNumber: f2510000.usb3
[    2.014194] hub 3-0:1.0: USB hub found
[    2.016674] hub 3-0:1.0: 1 port detected
[    2.019475] xhci-hcd f2510000.usb3: xHCI Host Controller
[    2.023515] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4
[    2.029729] xhci-hcd f2510000.usb3: Host supports USB 3.0 SuperSpeed
[    2.034833] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.041771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    2.048774] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.054723] usb usb4: Product: xHCI Host Controller
[    2.058318] usb usb4: Manufacturer: Linux 5.15.35-ipfire xhci-hcd
[    2.063132] usb usb4: SerialNumber: f2510000.usb3
[    2.066788] hub 4-0:1.0: USB hub found
[    2.069268] hub 4-0:1.0: 1 port detected
[    2.271022] ata1: SATA link down (SStatus 0 SControl 300)
[    2.275166] ata2: SATA link down (SStatus 0 SControl 300)
[   31.713898] ap0_sd_vccq: disabling
[   31.716021] cp0_sd_vccq: disabling
[  190.249571] dracut Warning: Could not boot.
[  190.263152] dracut Warning: /dev/disk/by-uuid/4a360415-161a-481d-843b-eb0e7a476d55 does not exist
+ '[' -f /run/initramfs/init.log ']'

Hi,

I am afraid @arne_f will have to take over from here, since he is the expert when it comes to ARM…

Thanks, and best regards,
Peter Müller

Looks like a missing kernel driver to access the MMC device. (maybee a pincontroller or voltage regulator)

2 Likes

Hi guys, sorry for the big delay in replying. In recent months in my spare time I have done other tests, but no solution.
is it possible that the only solution is to apply the patches to the kernel?
In case is it possible to do so?

es.
Linux - Patches by SolidRun