Raspberry Pi 3 b+

Hardware
5

Hi,

quoted from the installation instructions:

The ARM flash image is configured for serial console at default.

  • If using the serial console edit the config.txt file and add enable_uart=1 to the end
  • If using HDMI output and USB Keyboard edit the uENV.txt file and change SERIAL-CONSOLE=ON to OFF

In other words, after having written the image to your SD card, you will have to mount it
(should be no problem on Linux machines), edit uENV.txt accordingly, and unmount it.

Thanks, and best regards,
Peter Müller

1 Like