Recent fresh install of v164. Built-in NTP server is working but the default upstream servers appear to be wrong by 1 or 2 minutes? After changing to 2 servers in my country and synchronising everything it is fine. I also see this in the log from 4AM today: TIME INFO: Time Server 85.199.214.99 has…

Very strange - I only set it 3 hours ago and it was spot on, it appears to have drifted by 30 seconds already. I must have dodgy hardware. Wed Mar 23 08:43:55 PM GMT 2022 server 85.199.214.99, stratum 1, offset +30.880978, delay 0.03954 server 81.21.76.27, stratum 2, offset +30.881344, delay 0.04…

My NTP is off by less then 1 second. Is there anything in the messages log about NTP not contacting the ntp server? I am curious… Can you enter the command below and post the results? date && ntpdate -qu 0.ipfire.pool.ntp.org

go to menu Services → Time Server and take a screenshot of the NTP Configuration page. How often do you do Synchronization?

Following Jon’s example, I use date && ntpdate -qu time.nist.gov … accurate time.

Yeah… Maybe this… [image] NTP still not working Networking G’day all, Out of the box NTP does not seem to work correctly. we have: [root@cf-fw ~]# cat /etc/ntp.conf disable monitor restrict default nomodify noquery restrict 127.0.0.1 server 127.127.…

NTP issues are fixed in IPFire 2.27 - Core Update 169 released . see: https://git.ipfire.org/?p=ipfire-2.x.git;a=commit;h=2234e8aacac2e0d0b06dac4513585c15c2b3b440

IPFire NTP servers appear to be wrong

Network

stinga (stinga) 29 March 2022 04:29 6

Yeah… Maybe this…