Could someone point me in the direction of how to reinstall the software on a ipfire mini appliance?
I was locked in a no lights on green so from reading on this site I took it that I can reset it so I hit the reset button.
This is the entirety of my boot now.
ACPI: PM: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
pci 0000:00:02.1: enabling Extended Tags
pci 0000:00:02.4: PCI bridge to [bus 04]
pci 0000:00:02.4: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI: Interrupt link INTF configured for IRQ 10
pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:02.3: PCI bridge to [bus 03]
pci 0000:00:02.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:02.4: PCI bridge to [bus 04]
pci 0000:00:02.4: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:02.5: PCI bridge to [bus 05]
pci 0000:00:02.5: bridge window [mem 0xf7600000-0xf78fffff]
pci_bus 0000:00: resourbfffff]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:05: resource 1 [mem 0xf7600000-0xf78fffff]
amd_uncore: 4 amd_l2 counters detected
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: irq 18, io mem 0xf7f26000
scsi 0:0:0:0: Direct-Access ATA SATA SSD 01.3 PQ: 0 ANSI: 5
/sys/fs/cgroup
Setting x86_64-kernel runtime parameters…
Checking file systems…
/dev/sda1: clean, 588/32768 files, 26980/131072 blocks
WARNING:
File system errors were found and have been corrected. everything was fixed properly.
Starting kernel log daemon…
Adding static routes… [ OK ]
Mounting network file systems…
So looks like I have to reload.
I don’t know where to start as I’m brand new to ipfire.