Fixed: Can't see DHCP Leases

Hi Folks,

I can’t find the DHCP leases or they are not shown to me.

There are quite a few devices in the network that have been assigned an IP, only a few I have set statically by hand.
The devices are all reachable.

BTW: If I do a network scan (AngyIPScan), I don’t see any MAC addresses even in my own subnet. Is this normal?

What am I doing wrong?

Thanks in advance

The last 2 devices in your static list are overlapping your Dynamic IP range.
You should fix that.
Cant see Your Dynamic list from your screen shot.
you need to scroll down on the page.


That’s all, there isn’t any more content. :frowning:
Thanks for the hint, changed the dynamic IP range.

End addresses , are broadcast addresses.
I suggest changing to ,


The Secondary DNS is is it supposed to be like this?


Thanks! I have changed it. My old ailment (256 values) :frowning:
Yes, is the router on red.

I fixed it:
Deactivated DHCP on Green and Blue.
Activated it again
Via SSH:
/etc/init.d/dhcp stop
/etc/init.d/dhcp start
/etc/init.d/unbound restart
Now I can see the leases in the backend.


1 Like