cu203 stable - day two - possible KNOT problem DNSSEC/Time related. Testing. - Purpose of community contact: The Ethernet LAN port light: green and amber. What investigation determine why an amber light: configuration, cable quality, low data-rate?
Speed indicator
Hi. Thanks for the fast back. Is that slow In or Out, and is it a factor that be augmented? The Internet is Fibre. (to IPF through a Travel Router 7)
You’d need to check your board’s docs. Is it onboard LAN or a multi-port LAN card? If so, do you know the details?
the NIC is standard first generation IPFire Mini Appliance: “this appliance comes with four 1 Gigabit Ethernet Adapters. All of them are balanced over two processor cores and reach their maximum throughput with IPFire.”
From setup> GREEN : “pci: Intel Corporation I211 Gigabit Network │
│ Connection (rev 03)” │
│ GREEN : (00:0d:b9:53:e8:34)
The original IPFire Mini was a PC Engines based system.
From the PC Engines APU4 manual there is a line
- J23 LAN1..4
- GigE port. Left LED (green) indicates activity, right LED (amber) is
turned on when the connection is Gigabit.
- GigE port. Left LED (green) indicates activity, right LED (amber) is
which tells you what the two led lights mean.
Excellent. That means GL.inet travel router connecting Internet and IPF acts as a Media Converter?