Hi,
backup.pl fails with the following messages:
[root@machine ~]# /var/ipfire/backup/bin/backup.pl iso
tar: Removing leading `/' from member names
/etc/exports
tar: Removing leading `/' from hard link targets
/var/ipfire/nfs/nfs-server
tar: Removing leading `//' from member names
//etc/nut/
//etc/nut/upssched.conf.sample
//etc/nut/upsmon.conf.sample
//etc/nut/upsmon.conf
//etc/nut/nut.conf.sample
.
.
.
/var/log/vnstat/.green0
/var/log/vnstat/blue0
Fetching https://downloads.ipfire.org/releases/ipfire-2.x/2.27-core170/ipfire-2.27.x86_64-full-core170.iso.b2
Checking BLAKE2 checksum of ipfire-2.27.x86_64-full-core170.iso
b2sum: ipfire-2.27.x86_64-full-core170.iso.b2: no properly formatted checksum lines found
BLAKE2 checksum mismatch
Fetching again https://downloads.ipfire.org/releases/ipfire-2.x/2.27-core170/ipfire-2.27.x86_64-full-core170.iso
Checking BLAKE2 checksum of ipfire-2.27.x86_64-full-core170.iso again
b2sum: ipfire-2.27.x86_64-full-core170.iso.b2: no properly formatted checksum lines found
BLAKE2 checksum mismatch
aborting backup because BLAKE2 checksum mismatch
[root@machine ~]#
I’m on IPFire 2.27 (x86_64) - Core-Update 170. Not sure when this problem started. The last successful backup I have is from Core 167, but there could be other issues that I’ve not detected yet.
Any suggestions?
Thanks.