Hi there,
after updating and rebooting to Update 146, i only got roundabout 80 Mbps in downstream, before i had 330 Mbps. (Directly attached to my FritzBox i still receive 330 Mbps, like before)
Last time, i had this effect, i had to install a new kernel and everything went fine!
So, what do i have to do now?
Kind regards
Jean
from the ipfire console … I get 1000Mb/s for both.
ethtool red0 | grep Speed
ethtool green0 | grep SpeedThanks to Paul:
An yes, there we go!
ethtool red0 | grep Speed
Speed: 100Mb/s
[root@ipfire ~]# ethtool green0 | grep Speed
Speed: 100Mb/s
Voila!
Please post more details about the used hardware and the network detection part from /var/log/bootlog or related parts from /var/log/messages
Hi Arne,
here is the bootlog (trimed to 30000 chars) of my ipfire-DomU:
[ 0.000000] Linux version 4.14.184-ipfire (root.AT.x86-02.haj.ipfire .org) (gcc version 9.3.0 (GCC)) #1 SMP Fri Jun 26 10:32:17 GMT 2020
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: ‘AVX registers’
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using ‘standard’ format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000efffefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000effff000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010f7f4fff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Xen HVM domU, BIOS 4.8.5 01/10/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xeffff max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-combining
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000f6ac0-0x000f6acf]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0cffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0ccd5000, 0x0ccd5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35e3b000-0x36f14fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6A10 000024 (v02 Xen )
[ 0.000000] ACPI: XSDT 0x00000000FC00A630 000054 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 0x00000000FC00A340 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 0x00000000FC001310 008FAC (v02 Xen HVM 00000000 INTL 20160831)
[ 0.000000] ACPI: FACS 0x00000000FC0012D0 000040
[ 0.000000] ACPI: FACS 0x00000000FC0012D0 000040
[ 0.000000] ACPI: APIC 0x00000000FC00A440 000080 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: HPET 0x00000000FC00A540 000038 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: WAET 0x00000000FC00A580 000028 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: SSDT 0x00000000FC00A5B0 000031 (v02 Xen HVM 00000000 INTL 20160831)
[ 0.000000] ACPI: SSDT 0x00000000FC00A5F0 000031 (v02 Xen HVM 00000000 INTL 20160831)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2956MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] BRK [0x0ccd6000, 0x0ccd6fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000373fdfff]
[ 0.000000] HighMem [mem 0x00000000373fe000-0x00000000efffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000efffefff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000efffefff]
[ 0.000000] On node 0 totalpages: 982941
[ 0.000000] free_area_init_node: node 0, pgdat ccab0a00, node_mem_map f403b020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 222206 pages, LIFO batch:31
[ 0.000000] HighMem zone: 756737 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x96/0x503 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 28 pages/cpu s85324 r0 d29364 u114688
[ 0.000000] pcpu-alloc: s85324 r0 d29364 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 981173
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.184-ipfire root=UUID=7a4fa050-933f-43bc-93e7-0f2ce522fd78 ro panic=10
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] BRK [0x0ccd7000, 0x0ccd7fff] PGTABLE
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:000effff)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3869304K/3931764K available (7338K kernel code, 769K rwdata, 3000K rodata, 1148K init, 572K bss, 62460K reserved, 0K cma-reserved, 3026948K highmem)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 31264 entries in 62 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 2304, nr_irqs: 864, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=f3c7c000 soft=f3c7e000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] tsc: Fast TSC calibration using PIT
[ 0.016666] tsc: Detected 3209.732 MHz processor
[ 0.016666] Calibrating delay loop (skipped), value calculated using timer frequency… 6422.94 BogoMIPS (lpj=10699106)
[ 0.016666] pid_max: default: 32768 minimum: 301
[ 0.016666] ACPI: Core revision 20170728
[ 0.022736] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.022751] Security Framework initialized
[ 0.022759] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.022762] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.022976] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.022978] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.022980] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.022983] Spectre V2 : Mitigation: Full generic retpoline
[ 0.022985] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.022986] Speculative Store Bypass: Vulnerable
[ 0.022988] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[ 0.023008] SRBDS: Unknown: Dependent on hypervisor status
[ 0.023009] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.023085] Freeing SMP alternatives memory: 28K
[ 0.023502] smpboot: Max logical packages: 1
[ 0.023520] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024914] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.057980] smpboot: CPU0: Intel® Core™ i5-3470 CPU .AT. 3.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.058046] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[ 0.058078] Hierarchical SRCU implementation.
[ 0.058550] NMI watchdog: Perf event create on CPU 0 failed with -2
[ 0.058552] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.058593] smp: Bringing up secondary CPUs …
[ 0.058659] CPU 1 irqstacks, hard=f3d50000 soft=f3d52000
[ 0.058659] x86: Booting SMP configuration:
[ 0.058661] … node #0, CPUs: #1
[ 0.003333] Initializing CPU#1
[ 0.060075] CPU 2 irqstacks, hard=f3d74000 soft=f3d76000
[ 0.060078] #2
[ 0.003333] Initializing CPU#2
[ 0.062591] CPU 3 irqstacks, hard=f3da4000 soft=f3da6000
[ 0.062591] #3
[ 0.003333] Initializing CPU#3
[ 0.063348] smp: Brought up 1 node, 4 CPUs
[ 0.063348] smpboot: Total of 4 processors activated (25688.76 BogoMIPS)
[ 0.073490] devtmpfs: initialized
[ 0.073490] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.073490] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.073548] pinctrl core: initialized pinctrl subsystem
[ 0.073671] NET: Registered protocol family 16
[ 0.073802] EISA bus registered
[ 0.073829] cpuidle: using governor ladder
[ 0.073829] cpuidle: using governor menu
[ 0.073829] ACPI: bus type PCI registered
[ 0.073829] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.074097] PCI: PCI BIOS revision 2.10 entry at 0xfd501, last bus=0
[ 0.074100] PCI: Using configuration type 1 for base access
[ 0.075005] ACPI: Added _OSI(Module Device)
[ 0.075005] ACPI: Added _OSI(Processor Device)
[ 0.075005] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.075005] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080870] ACPI: Interpreter enabled
[ 0.080882] ACPI: (supports S0 S3 S5)
[ 0.080884] ACPI: Using IOAPIC for interrupt routing
[ 0.080900] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.081436] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.087394] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.087401] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.087405] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.087409] acpi PNP0A03:00: fail to add MMCONFIG information, can’t access extended PCI configuration space under this bridge.
[ 0.091080] PCI host bridge to bus 0000:00
[ 0.091083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.091086] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.091090] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.091092] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
[ 0.091094] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.091300] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.093708] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.096504] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.104523] pci 0000:00:01.1: reg 0x20: [io 0xc520-0xc52f]
[ 0.108817] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.108822] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.108824] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.108826] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.109473] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[ 0.116677] pci 0000:00:01.2: reg 0x20: [io 0xc500-0xc51f]
[ 0.120803] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.123244] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.123301] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.124283] pci 0000:00:02.0: [5853:0001] type 00 class 0xff8000
[ 0.126675] pci 0000:00:02.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.129740] pci 0000:00:02.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
[ 0.142094] pci 0000:00:03.0: [1013:00b8] type 00 class 0x030000
[ 0.144849] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
[ 0.147927] pci 0000:00:03.0: reg 0x14: [mem 0xf3110000-0xf3110fff]
[ 0.161271] pci 0000:00:03.0: reg 0x30: [mem 0xf3100000-0xf310ffff pref]
[ 0.161446] pci 0000:00:03.0: BAR 0: assigned to efifb
[ 0.162120] pci 0000:00:04.0: [10ec:8139] type 00 class 0x020000
[ 0.164643] pci 0000:00:04.0: reg 0x10: [io 0xc100-0xc1ff]
[ 0.166679] pci 0000:00:04.0: reg 0x14: [mem 0xf3111000-0xf31110ff]
[ 0.179042] pci 0000:00:04.0: reg 0x30: [mem 0xf3000000-0xf303ffff pref]
[ 0.179861] pci 0000:00:05.0: [10ec:8139] type 00 class 0x020000
[ 0.182652] pci 0000:00:05.0: reg 0x10: [io 0xc200-0xc2ff]
[ 0.184719] pci 0000:00:05.0: reg 0x14: [mem 0xf3111100-0xf31111ff]
[ 0.197904] pci 0000:00:05.0: reg 0x30: [mem 0xf3040000-0xf307ffff pref]
[ 0.198677] pci 0000:00:06.0: [10ec:8139] type 00 class 0x020000
[ 0.201306] pci 0000:00:06.0: reg 0x10: [io 0xc300-0xc3ff]
[ 0.203347] pci 0000:00:06.0: reg 0x14: [mem 0xf3111200-0xf31112ff]
[ 0.215766] pci 0000:00:06.0: reg 0x30: [mem 0xf3080000-0xf30bffff pref]
[ 0.216536] pci 0000:00:07.0: [10ec:8139] type 00 class 0x020000
[ 0.220006] pci 0000:00:07.0: reg 0x10: [io 0xc400-0xc4ff]
[ 0.223340] pci 0000:00:07.0: reg 0x14: [mem 0xf3111300-0xf31113ff]
[ 0.234638] pci 0000:00:07.0: reg 0x30: [mem 0xf30c0000-0xf30fffff pref]
[ 0.235796] pci_bus 0000:00: on NUMA node 0
[ 0.236087] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 0.236428] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.236755] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.237073] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 0.238455] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[ 0.238455] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.238455] pci 0000:00:03.0: vgaarb: bridge control possible
[ 0.238455] vgaarb: loaded
[ 0.238455] SCSI subsystem initialized
[ 0.238455] libata version 3.00 loaded.
[ 0.238455] ACPI: bus type USB registered
[ 0.238455] usbcore: registered new interface driver usbfs
[ 0.238455] usbcore: registered new interface driver hub
[ 0.238455] usbcore: registered new device driver usb
[ 0.238455] EDAC MC: Ver: 3.0.0
[ 0.240562] PCI: Using ACPI for IRQ routing
[ 0.240562] PCI: pci_cache_line_size set to 64 bytes
[ 0.241176] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.241178] e820: reserve RAM buffer [mem 0xeffff000-0xefffffff]
[ 0.241339] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.241339] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.241339] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[ 0.249999] clocksource: Switched to clocksource hpet
[ 0.256000] VFS: Disk quotas dquot_6.6.0
[ 0.256017] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.256061] pnp: PnP ACPI init
[ 0.256128] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.256134] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256194] system 00:01: [io 0x08a0-0x08a3] has been reserved
[ 0.256197] system 00:01: [io 0x0cc0-0x0ccf] has been reserved
[ 0.256199] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.256202] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256222] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.256241] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.256260] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.256271] pnp 00:05: [dma 2]
[ 0.256280] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.256301] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.256344] system 00:07: [io 0xae00-0xae0f] has been reserved
[ 0.256346] system 00:07: [io 0xb044-0xb047] has been reserved
[ 0.256350] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256763] pnp: PnP ACPI: found 8 devices
[ 0.256767] PnPBIOS: Disabled
[ 0.296110] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.296125] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.296126] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.296127] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.296128] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
[ 0.296185] NET: Registered protocol family 2
[ 0.296291] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.296302] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.296312] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.296328] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.296332] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.296355] NET: Registered protocol family 1
[ 0.296364] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.296496] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.296599] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.298491] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.298747] PCI: CLS 0 bytes, default 64
[ 0.298835] Trying to unpack rootfs image as initramfs…
[ 1.268185] Freeing initrd memory: 17256K
[ 1.268570] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 1.268573] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 1.268575] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 1.268576] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 1.269551] apm: BIOS not found.
[ 1.269570] Scanning for low memory corruption every 60 seconds
[ 1.269604] simple-framebuffer simple-framebuffer.0: framebuffer at 0xf0000000, 0x160000 bytes, mapped to 0xf7e00000
[ 1.269607] simple-framebuffer simple-framebuffer.0: format=r8g8b8, mode=800x600x24, linelength=2400
[ 1.271364] Console: switching to colour frame buffer device 100x37
[ 1.272858] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 1.273338] NatSemi SCx200 Driver
[ 1.273552] Initialise system trusted keyrings
[ 1.273662] workingset: timestamp_bits=30 max_order=20 bucket_order=0
[ 2.103951] NET: Registered protocol family 38
[ 2.103981] Key type asymmetric registered
[ 2.104001] Asymmetric key parser ‘x509’ registered
[ 2.104862] bounce: pool size: 64 pages
[ 2.105711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.106667] io scheduler noop registered
[ 2.107538] io scheduler deadline registered
[ 2.108406] io scheduler cfq registered (default)
[ 2.109223] io scheduler mq-deadline registered
[ 2.110050] io scheduler kyber registered
[ 2.110849] io scheduler bfq registered
[ 2.111943] intel_idle: Please enable MWAIT in BIOS SETUP
[ 2.112046] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.112873] ACPI: Power Button [PWRF]
[ 2.113733] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 2.114561] ACPI: Sleep Button [SLPF]
[ 2.115767] isapnp: Scanning for PnP cards…
[ 2.485849] isapnp: No Plug & Play device found
[ 2.486749] tsc: Refined TSC clocksource calibration: 3209.410 MHz
[ 2.487584] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e430375abd, max_idle_ns: 440795352351 ns
[ 2.488426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.519651] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.521189] Non-volatile memory driver v1.3
[ 2.522101] Linux agpgart interface v0.103
[ 2.525135] brd: module loaded
[ 2.527148] loop: module loaded
[ 2.527989] ata_piix 0000:00:01.1: version 2.13
[ 2.528833] scsi host0: ata_piix
[ 2.529774] scsi host1: ata_piix
[ 2.530543] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc520 irq 14
[ 2.531299] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc528 irq 15
[ 2.532083] libphy: Fixed MDIO Bus: probed
[ 2.532806] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 2.533565] ehci-pci: EHCI PCI platform driver
[ 2.534291] ehci-platform: EHCI generic platform driver
[ 2.535018] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 2.535750] ohci-pci: OHCI PCI platform driver
[ 2.536482] ohci-platform: OHCI generic platform driver
[ 2.537221] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.539119] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 2.539860] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 2.540719] uhci_hcd 0000:00:01.2: detected 2 ports
[ 2.541725] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c500
[ 2.542684] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.543495] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.544266] usb usb1: Product: UHCI Host Controller
[ 2.545017] usb usb1: Manufacturer: Linux 4.14.184-ipfire uhci_hcd
[ 2.545761] usb usb1: SerialNumber: 0000:00:01.2
[ 2.546611] hub 1-0:1.0: USB hub found
[ 2.547363] hub 1-0:1.0: 2 ports detected
[ 2.548464] usbcore: registered new interface driver uas
[ 2.549194] usbcore: registered new interface driver usb-storage
[ 2.549905] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.553457] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.554136] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.554874] mousedev: PS/2 mouse device common for all mice
[ 2.555985] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.556745] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[ 2.557487] device-mapper: uevent: version 1.0.3
[ 2.558298] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel.AT.redhat.com
[ 2.559381] platform eisa.0: Probing EISA bus 0
[ 2.560135] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.561166] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.561991] hidraw: raw HID events driver © Jiri Kosina
[ 2.562800] usbcore: registered new interface driver usbhid
[ 2.563583] usbhid: USB HID core driver
[ 2.564387] Netfilter messages via NETLINK v0.30.
[ 2.565163] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.565945] nf_tables: © 2007-2009 Patrick McHardy <kaber.AT.trash.net>
[ 2.566804] ip_tables: © 2000-2006 Netfilter Core Team
[ 2.567559] Initializing XFRM netlink socket
[ 2.568362] NET: Registered protocol family 10
[ 2.569451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.572640] Segment Routing with IPv6
[ 2.573486] ip6_tables: © 2000-2006 Netfilter Core Team
[ 2.574290] NET: Registered protocol family 17
[ 2.575087] Bridge firewalling registered
[ 2.575861] Key type dns_resolver registered
[ 2.577003] mce: Using 2 MCE banks
[ 2.577774] Using IPI No-Shortcut mode
[ 2.582758] sched_clock: Marking stable (2582751739, 0)->(2678475909, -95724170)
[ 2.584459] registered taskstats version 1
[ 2.585256] Loading compiled-in X.509 certificates
[ 2.589698] Loaded X.509 cert ‘IPFire .org: Build time autogenerated kernel key: c576ebd54e2d2aa29fc2b8627a25435aa1baab39’
[ 2.593216] Key type encrypted registered
[ 2.594969] rtc_cmos 00:02: setting system clock to 2020-07-02 11:52:07 UTC (1593690727)
[ 2.693481] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 2.694362] ata1.00: 20971520 sectors, multi 16: LBA48
[ 2.695227] ata1.01: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 2.696085] ata1.01: 41943040 sectors, multi 16: LBA48
[ 2.698979] ata1.00: configured for MWDMA2
[ 2.701317] ata1.01: configured for MWDMA2
[ 2.702297] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 2.703386] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
[ 2.704238] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.705079] sd 0:0:0:0: [sda] Write Protect is off
[ 2.705895] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.706018] scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 2.706719] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.707183] sd 0:0:1:0: [sdb] 41943040 512-byte logical blocks: (21.5 GB/20.0 GiB)
[ 2.708597] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.709006] sda: sda1 sda2 sda3 sda4
[ 2.709473] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.710709] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.711171] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.712029] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.714109] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.715606] Freeing unused kernel memory: 1148K
[ 2.743645] Write protecting the kernel text: 7340k
[ 2.744634] Write protecting the kernel read-only data: 3004k
[ 2.745459] rodata_test: all tests were successful
[ 2.791826] dracut: dracut-038
[ 2.850136] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.851026] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.851866] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.853677] udevd[244]: starting eudev-3.2.6
[ 2.880043] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 2.947508] FDC 0 is a S82078B
[ 3.059085] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 3.060403] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 3.061169] usb 1-1: Product: QEMU USB Tablet
[ 3.061903] usb 1-1: Manufacturer: QEMU
[ 3.062623] usb 1-1: SerialNumber: 42
[ 3.072390] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[ 3.074784] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 3.277225] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.330989] dracut: Checking ext4: /dev/disk/by-uuid/7a4fa050-933f-43bc-93e7-0f2ce522fd78
[ 3.332075] dracut: issuing e2fsck -a /dev/disk/by-uuid/7a4fa050-933f-43bc-93e7-0f2ce522fd78
[ 3.350692] dracut: /dev/disk/by-uuid/7a4fa050-933f-43bc-93e7-0f2ce522fd78: clean, 26635/131072 files, 372753/524288 blocks
[ 3.353958] dracut: Mounting /dev/disk/by-uuid/7a4fa050-933f-43bc-93e7-0f2ce522fd78 with -o defaults,ro
[ 3.362245] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.390470] random: fast init done
[ 3.480712] dracut: Mounted root filesystem /dev/sda3
[ 3.497433] clocksource: Switched to clocksource tsc
[ 3.523753] dracut: Switching root
[ 4.744647] lp: driver loaded but no devices found
[ 5.025765] urandom_read: 2 callbacks suppressed
[ 5.025766] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.026517] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.027727] random: udevd: uninitialized urandom read (16 bytes read)
[ 5.107106] udevd[539]: RUN{builtin}: ‘firmware’ unknown /lib/udev/rules.d/50-firmware.rules:3
[ 5.109068] udevd[539]: specified group ‘input’ unknown
[ 5.109119] udevd[539]: specified group ‘render’ unknown
[ 5.109265] udevd[539]: specified group ‘kvm’ unknown
[ 5.290208] udevd[540]: starting eudev-3.2.6
[ 5.662846] random: crng init done
[ 5.662848] random: 2 urandom warning(s) missed due to ratelimiting
[ 5.719271] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.145041] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 6.165215] 8139cp 0000:00:04.0 eth0: RTL-8139C+ at 0xf7c06000, 00:ff:05:a1:00:01, IRQ 32
[ 6.165553] piix4_smbus 0000:00:01.3: SMBus Host Controller not enabled!
[ 6.187917] 8139cp 0000:00:05.0 eth1: RTL-8139C+ at 0xf7c08100, 00:ff:05:a1:10:01, IRQ 36
[ 6.205838] 8139cp 0000:00:06.0 eth2: RTL-8139C+ at 0xf7c0a200, 00:ff:05:a1:20:01, IRQ 40
[ 6.226487] 8139cp 0000:00:07.0 eth3: RTL-8139C+ at 0xf7c48300, 00:ff:05:a1:30:01, IRQ 44
[ 6.409305] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 6.863063] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 8.143700] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.339988] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.390586] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.414864] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.482118] EXT4-fs (sdb): mounting ext3 file system using the ext4 subsystem
[ 8.728171] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[ 8.799742] Adding 257204k swap on /dev/sda2. Priority:1 extents:1 across:257204k
[ 12.085425] xt_time: kernel timezone is -0000
[ 12.366960] 8139cp 0000:00:06.0 red0: renamed from eth2
[ 12.384121] 8139cp 0000:00:04.0 green0: renamed from eth0
[ 12.393520] 8139cp 0000:00:05.0 orange0: renamed from eth1
[ 12.417007] 8139cp 0000:00:07.0 blue0: renamed from eth3
Problems probably because of x86?
Kind regards
Your hypervisor emulate a Realtek 8139 which is a 100mBit card. You have to reconfigure the vm to a Gigabit card. (Best one with low emulation overhead like virtio-net.)
I had to install from scratch!
Unfortunately the backup-Script does not follow any pathes in config-files (i.e nginx, nrpe), so i had to restart the old ipfire several times to make my own backups. RDDs crashed, no way to recover.
But now its like a charme, like before