After to upgrade to release 183 blue no exist

1

hi
After to upgrade to release 183 the blue interface no see
the usb wiffi key no work
ty

2

Please provide some more details about your hardware.

3

hi
the info in log

kernel: 	usb 1-2: SerialNumber: 123456
kernel: 	usb 1-2: Manufacturer: Realtek
kernel: 	usb 1-2: Product: D-Link Wireless Adapter
kernel: 	usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: 	usb 1-2: New USB device found, idVendor=2001, idProduct=3315, bcdDevice= 0.00
kernel: 	usb 1-2: new high-speed USB device number 4 using xhci_hcd
kernel: 	usb 1-2: USB disconnect, device number 3
kernel: 	decompression failed with status 6

working good in 182 but 183 no detected
ty

4

The module 8812au should according modinfo support VID2001 PID3315.
Is there any other message like missing firmware or similar things in the log.

I can try my rtl8812au adapter next weekend…

1 Like
5

ty
i have instal clean with 182 ok with 183 no good
ty

6

I can confirm a bug here.

The kernel is not able to uncompress this module. (it is the only out of tree module we have left)
try:
xz -d /lib/modules/6.6.15-ipfire/extra/wlan/8812au.ko.xz
depmod -a

2 Likes
7

hi

try:
xz -d /lib/modules/6.6.15-ipfire/extra/wlan/8812au.ko.xz
depmod -a

this comand work ty

the log returns

2 Time(s): usb 4-2: Int endpoint with wBytesPerInterval of 512 in config 1 interface 0 altsetting 0 ep 133: setting to 64
 2 Time(s): usb 4-2: Manufacturer: Realtek
 2 Time(s): usb 4-2: New USB device found, idVendor=2001, idProduct=3315, bcdDevice= 0.00
 2 Time(s): usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 2 Time(s): usb 4-2: Product: D-Link Wireless Adapter
 2 Time(s): usb 4-2: SerialNumber: 123456
 2 Time(s): usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
 4 Time(s): usbcore: registered new interface driver rtl8812au
 2 Time(s): warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

i see 1 warning

warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

it’s normal ?
ty

8

yes this is normal. IPFire use iwconfig to init some settings.

9

yes this is normal. IPFire use iwconfig to init some settings.

ok ty

i have probleme for automatic wifi chanels detection no work i do force chanel one per one for wifi conection
ty

10

Has this worked before? At my information only Atheros based cards support ACS.

11

no ty for info is no possible
ty