Red0 problems after an energy shutdown

[sergio1960 (feles)]

Hello everybody,

After an energy shutdown, red0 nic doesn’t start. At boot time there’s a message in red indicating that red0 doesn’t exist. This is not the first time.

I have to setup red0 again to get the network with internet.

I have assigned a mac address to red0 nic, and the question is
Can this affect the nic at boot time after energy recovery?

I’m not talking about a reboot, but an energy recovery after a 5 minutes or more with the box in off.

Thank you.

[donteatyellowsnow (John Doe)]

This sounds very similar to my problem I had. It’s only happened once so far.

RED no longer connects

Recently my APU2D4 router running IPFire 2.25 (x86_64) - Core Update 142 stopped connecting to RED. Going into setup showed the network settings as it should be, so I assumed something got corrupted. I’ve re-installed IPFire and RED connects and everything seems to work correctly. That being said, I do not shutdown the router properly from the web admin page as it takes way longer than it really should. I just power off the router quick and easy. My assumption is that powering it off this way g…

[sergio1960 (feles)]

Thanks John Doe,

This could be the case. This happen when there’s a power drop from the public system, obviously the system is shutted down improperly, after some minutes or more when the power is up again I lost the red0 nic, but only red0. Green0 works as usual.

I have optic fiber service and the ip is served by the ISP’s dhcp server. As mentioned in original post I have to setup red0 again to get internet access.