# Problems Connecting IPFire with Remote Logging Server

**URL:** <https://community.ipfire.org/t/problems-connecting-ipfire-with-remote-logging-server/2531>\
**Category:** Monitoring\
**Created:** [15 June 2020 06:59 UTC](https://community.ipfire.org/t/problems-connecting-ipfire-with-remote-logging-server/2531 "2020-06-15T06:59:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![afathurizki](https://community.ipfire.org/user_avatar/community.ipfire.org/afathurizki/32/270_2.png) [@afathurizki](https://community.ipfire.org/u/afathurizki)\
**Post date:** [15 June 2020 06:59 UTC](https://community.ipfire.org/t/problems-connecting-ipfire-with-remote-logging-server/2531/1 "2020-06-15T06:59:04Z")

</div>

I encountered a problem while doing remote logging with syslog on IPFire. Here is the thing that I have done on IPFire:

- Enter the syslog server IP address for remote logging under Logs -\> Log Settings then press save.

Here is the thing that I have done on the Monitoring Station (in this case I use SPLUNK with IP Address 10.10.12.18)

- Add ‘input data’ from port 514

I want to get logs from IPFire to be sent to SPLUNK especially IPS log. In Logs -\> IPS Logs, I get the attack information normally. But when I see it through SPLUNK, I didn’t get any information from IPS.

Can anyone help me?