# PING, but no access to GUI Server

**URL:** <https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278>\
**Category:** Installing & Running IPFire\
**Created:** [15 May 2020 11:33 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278 "2020-05-15T11:33:40Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![whitetiger](https://community.ipfire.org/user_avatar/community.ipfire.org/whitetiger/32/8435_2.png) [@whitetiger](https://community.ipfire.org/u/whitetiger)\
**Post date:** [15 May 2020 11:33 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/1 "2020-05-15T11:33:40Z")

</div>

In a new LAN, I have this network.

(Public Address)  
Router  
192.168.43.2

192.168.43.3  
(Red NIC)  
IPFIRE – (Orange NIC) 192.168.113.1 -------- 192.168.113.11 (Server)  
(Green NIC)  
192.168.111.1

192.168.111.101  
My PC

From MyPC I’m able to do the PING **on every address** , but not to do [http://192.168.113.11](http://192.168.113.11)  
Instead, if I change the static address of my PC’s NIC to 192.168.113.101 and insert the cable directly into the server or in its switch I can access the GUI with the same URL.

The server is configured with  
192.168.113.11/24  
Gtw: 192.168.113.1  
DNS 8.8.8.8,8.8.4.4

In IPFire there is installed

- IDS on Green
- Guardian
- Clamav + Squidclamav
- Proxy Web + SARG
- URL Filter
- Update accelerator

I also tried creating two rules in the firewall

- From Green
- To 192.168.113.11
- HTTP / HTTPS presets
- Accept

---

<div class="post-metadata">

**Author:** ![pmueller](https://community.ipfire.org/user_avatar/community.ipfire.org/pmueller/32/9019_2.png) [@pmueller](https://community.ipfire.org/u/pmueller)\
**Post date:** [15 May 2020 16:16 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/2 "2020-05-15T16:16:14Z")

</div>

Hi,

> From MyPC I’m able to do the PING **on every address** , but not to do [http://192.168.113.11](http://192.168.113.11)

you probably need a to configure firewall rule for allowing this.

Are there any firewall log entries in this case?

Thanks, and best regards,  
Peter Müller

---

<div class="post-metadata">

**Author:** ![whitetiger](https://community.ipfire.org/user_avatar/community.ipfire.org/whitetiger/32/8435_2.png) [@whitetiger](https://community.ipfire.org/u/whitetiger)\
**Post date:** [16 May 2020 11:13 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/3 "2020-05-16T11:13:55Z")

</div>

> [@pmueller](#):
>
> you probably need a to configure firewall rule for allowing this.

I have put the rule; I wrote it before.  
Obviously it is not enough.

But I don’t understand why I from the LAN (Green) I can access in the DMZ (Orange) for example the SQL server, the Remote Desktop and other services without the need for rules.  
And instead for port 80 I have to write one.  
I believed that from the LAN (Green) I could access to DMZ (Orange) without problems and that the rules were necessary for access from Internet (Red).

---

<div class="post-metadata">

**Author:** ![anon42188109](https://community.ipfire.org/letter_avatar_proxy/v4/letter/a/94ad74/32.png) [@anon42188109](https://community.ipfire.org/u/anon42188109)\
**Post date:** [16 May 2020 15:37 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/4 "2020-05-16T15:37:24Z")

</div>

I think you have the wrong Gateway on the orange network …  
green -\> orange is allowed by default, the opposite needs pinholes.

---

<div class="post-metadata">

**Author:** ![whitetiger](https://community.ipfire.org/user_avatar/community.ipfire.org/whitetiger/32/8435_2.png) [@whitetiger](https://community.ipfire.org/u/whitetiger)\
**Post date:** [16 May 2020 16:48 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/5 "2020-05-16T16:48:42Z")

</div>

> [@anon42188109](#):
>
> I think you have the wrong Gateway on the orange network …  
> green → orange is allowed by default, the opposite needs pinholes.

Right now I’m not near the firewall, but, if I remember correctly, in the setup I can define:

- IP and Netmask of Green and Orange.
- IP, Netmask, Gateway and DNS for Red.

There is no gateway for Orange.

Then, **on the machines located in the Orange** , I have to put:

- a static address
- the Gateway to the Orange NIC on IPFire
- the public DNS, like 8.8.8.8

---

<div class="post-metadata">

**Author:** ![whitetiger](https://community.ipfire.org/user_avatar/community.ipfire.org/whitetiger/32/8435_2.png) [@whitetiger](https://community.ipfire.org/u/whitetiger)\
**Post date:** [17 May 2020 16:52 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/6 "2020-05-17T16:52:14Z")

</div>

==== Update ===  
I confirm the IP Address of the server:  
192.168.113.11/24  
Gtw: 192.168.113.1  
DNS: 8.8.8.8

I’m not able to access with http from a PC in Green, but only from a PC in Orange

![IP-DMZ](https://community.ipfire.org/uploads/default/original/2X/e/e7bb8484116bcce53d6454858794712832bc3796.png)

---

<div class="post-metadata">

**Author:** ![pike\_it](https://community.ipfire.org/user_avatar/community.ipfire.org/pike_it/32/16763_2.png) [@pike\_it](https://community.ipfire.org/u/pike_it)\
**Post date:** [17 May 2020 17:06 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/7 "2020-05-17T17:06:41Z")

</div>

Maybe some of the rules do not allow access from green to Web Interface?

---

<div class="post-metadata">

**Author:** ![whitetiger](https://community.ipfire.org/user_avatar/community.ipfire.org/whitetiger/32/8435_2.png) [@whitetiger](https://community.ipfire.org/u/whitetiger)\
**Post date:** [18 May 2020 08:11 UTC](https://community.ipfire.org/t/ping-but-no-access-to-gui-server/2278/8 "2020-05-18T08:11:54Z")

</div>

**Found and solved!**  
The problem is related to **Network Based Access Control**.  
By moving IPFire from the test network to the production network and therefore changing the addresses of the Green and Orange areas, the old address remains in the field Allowed subnets.  
Changed this with the new subnet address, I am unable to access the server again.
