# Get "\\x00" SSL requests on HTTP filtered?

**URL:** <https://community.ipfire.org/t/get-x00-ssl-requests-on-http-filtered/14582>\
**Category:** Intrusion Prevention\
**Created:** [3 September 2025 04:57 UTC](https://community.ipfire.org/t/get-x00-ssl-requests-on-http-filtered/14582 "2025-09-03T04:57:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![firewire](https://community.ipfire.org/user_avatar/community.ipfire.org/firewire/32/16590_2.png) [@firewire](https://community.ipfire.org/u/firewire)\
**Post date:** [3 September 2025 04:57 UTC](https://community.ipfire.org/t/get-x00-ssl-requests-on-http-filtered/14582/1 "2025-09-03T04:57:46Z")

</div>

Hi there, yesterday evening a lot of SSL requests from mainly AWS servers flooded my HTTP port 80, nginx logs looked like this:

```auto
15.236.39.143 - - [02/Sep/2025:19:46:58 +0200] "\x16\x03\x01\x00\xEE\x01\x00\x00\xEA\x03\x03\xAC\x01#\xEDz6\xCAjW\x08\x8D\x0Ed\xAE\xC9\x0380\x8E\x1F$w\xBAQ\xA0s\xC1\xB3\x07&g\x82 \x9CJI\x97\xB9\xFE\xBD\x9A\xA2\xD9\xDFJ4\xDC\x03\x22ud\x9A\xBB\xF1O\x8C\xB9e\x15\x9C\xBC&\xA7\xC6L\x00&\xC0+\xC0/\xC0,\xC00\xCC\xA9\xCC\xA8\xC0\x09\xC0\x13\xC0" 400 150 "-" "-" 0.033	

```

For any IP causing this kind of traffic I’ve enabled a fail2ban rule, which blocks these and also sends an e-mail response. However, due to the mass of IPs involved yesterday (over 90 before I closed the ports of the firewall) I wonder if there is a Suricata rule which could cap these kind of requests beforehand?
