Hi, on the start page of the admin interface it shows me that my sda3 is filling up. [image] [root@ipfire ~]# du / -d1 -h | sort -r -h du: cannot access '/proc/14285/task/14350/fdinfo/135': No such file or directory du: cannot access '/proc/17300/task/17300/fd/4': No such file or directory du: c…

sda3 on my IPFire is setup as the swap partition and it really should be empty. [image] anon11635230: 4.8G / Your root partition has 4.8G used and IPFire normally makes this partition as big as it is able to and your hard disk is shown on your fireinfo as being 15GB so I am not sure that …

lsblk says: [root@ipfire ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 14.9G 0 disk ├─sda4 8:4 0 11.9G 0 part /var ├─sda2 8:2 0 982.9M 0 part [SWAP] ├─sda3 8:3 0 2G 0 part / └─sda1 8:1 0 64M 0 part /boot Do you mean this overview?: [imag…

Okay, so you have a root partition and a var partition. The separate root and var partitions were stopped in 2018 and made into a single root partition for the OS and the log files etc. Your sda3 partition is not being affected by the log files as they are stored in sda4 and still have 10G spare. …

Ufffff… :frowning: Is there no other way to clean the /?

The problem is that the root in your setup is just the OS. It does not contain any logs or backups or settings files. Those are all in the /var partition. EDIT: Your sda3 2G partition has 856M in /lib and 793M in /usr. Neither of those directories contain anything that you can delete. Sorry to be…

[image] Remove unneeded locales to free disk space Community Have tested it out and didn’t notice any problems. That step would have to be repeated after every core update, though. I’m now planning the re-installation to “update” the partition scheme. at …

Hello, I DO NOT RECOMMEND THIS - TRY IT ON YOUR OWN RISK I have increased my / partition from APU2D4 by stopping swap and using the swap partition Turn off swap swapoff -a edit fstab and mtab → comment the swap entries. Run fdisk -l and save the output to a file, copy that file on your lapt…

Looking at the steps listed to be done and checked, I would find it quicker to do a backup, including logs, and then to do a new install followed by a restore of the backup.

Good recipe to regain space with the outdated partition scheme. New installation do not have an own /var partition, see Filesystem Size Used Avail Use% Mounted on devtmpfs 971M 4.0K 971M 1% /dev tmpfs 983M 12K 983M 1% /dev/shm tmpfs 983M 572K 983M 1% /…

Filesystem runs full

Hardware

jon (Jon) 12 February 2022 18:08 8

I went through the same thing. Re-installing is easier then it sounds. (just make sure your backup is downloaded to a separate computer!)