# DNS server Status broken

**URL:** <https://community.ipfire.org/t/dns-server-status-broken/7056>\
**Category:** DNS\
**Created:** [18 January 2022 20:42 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056 "2022-01-18T20:42:52Z")\
**Posts on this page:** 16\
**Page:** 2

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [19 January 2022 04:02 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/21 "2022-01-19T04:02:21Z")

</div>

That’s because you are using cable internet, I am using fiber optic. And I tried another router without restarting the modem and it work right away, its an openwrt router. The only reason why I wanted ipfire because it is linux base, and the APU board that I installed ipfire has a realtek nic, linux base routers works better with realtek than freebsd based like pfsense/opnsense.

---

<div class="post-metadata">

**Author:** ![roberto](https://community.ipfire.org/user_avatar/community.ipfire.org/roberto/32/8265_2.png) [@roberto](https://community.ipfire.org/u/roberto)\
**Post date:** [19 January 2022 06:51 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/22 "2022-01-19T06:51:39Z")

</div>

Hi @linuxgeek.

A strange idea.

Haven’t you created a Firewall rule that prevents communication with this?:

 ![imagen](https://community.ipfire.org/uploads/default/original/2X/6/600bb116b89f18a19f9c31b8f7735b92615f1672.png)

I tell you this, since I once created a rule that prevented outgoing communication to certain countries and I marked this and the DNSs did not work.

Greetings.

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [19 January 2022 20:54 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/23 "2022-01-19T20:54:56Z")

</div>

It is a fresh install, so I havent created any rules yet. Whatever the default rules are, is what is in the current settings of the firewall. I did a test again by connecting the ipfire to the lan side of my pfsense, and it work, basically the pfsense is the one resolving any request, it also became a gateway for ipfire. My thought is it is probably a DNS server issue with ipfire, probably the implementation of the DNSSEC.

---

<div class="post-metadata">

**Author:** ![bonnietwin](https://community.ipfire.org/user_avatar/community.ipfire.org/bonnietwin/32/12350_2.png) [@bonnietwin](https://community.ipfire.org/u/bonnietwin)\
**Post date:** [19 January 2022 21:17 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/24 "2022-01-19T21:17:10Z")

</div>

If your isp hijacks all dns requests from your connection and sends them to their dns server and they do not use dnssec validation then you will end up without any dns resolution capability.

dnssec validation is done by default in IPFire and can not be turned off.

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [19 January 2022 21:54 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/25 "2022-01-19T21:54:25Z")

</div>

I totally understand what you mean. What I am confused is with my instalaltion why it can not ping the gateway provided by ISP. And because of this DNS server will fail also. However if the connection is passed through the pfsense router, ipfire can ping the gateway provided by the pfsense. I think this is really where the problem is?

---

<div class="post-metadata">

**Author:** ![bonnietwin](https://community.ipfire.org/user_avatar/community.ipfire.org/bonnietwin/32/12350_2.png) [@bonnietwin](https://community.ipfire.org/u/bonnietwin)\
**Post date:** [19 January 2022 22:23 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/26 "2022-01-19T22:23:22Z")

</div>

> [@linuxgeek](#):
>
> What I am confused is with my instalaltion why it can not ping the gateway provided by ISP.

Yes that is confusing.  
I have a fibre connection and I just tried pinging my gateway and it worked fine.

Does your main page show your Gateway IP and your Internet IP correctly.

What message do you get with the ping. Does adding the -v verbose option give any more info?

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [19 January 2022 22:27 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/27 "2022-01-19T22:27:38Z")

</div>

Yes, the main page shows everything correctly. Public ip address, gateway, dns. When I ping wihtout the option verbose, it onlly says host unreachable.

---

<div class="post-metadata">

**Author:** ![bonnietwin](https://community.ipfire.org/user_avatar/community.ipfire.org/bonnietwin/32/12350_2.png) [@bonnietwin](https://community.ipfire.org/u/bonnietwin)\
**Post date:** [19 January 2022 22:55 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/28 "2022-01-19T22:55:45Z")

</div>

host unreachable suggests a problem with the routing to get to the destination.  
dns shouldn’t be a problem here as you are using the gateway ip address for the ping.

What does the routing table look like if you run route -n in the console?

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [19 January 2022 23:17 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/29 "2022-01-19T23:17:15Z")

</div>

I will check it in the CLI. For reference I have a picture on my previous post of the routing table through the GUI.

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [20 January 2022 05:43 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/30 "2022-01-20T05:43:45Z")

</div>

![image](https://community.ipfire.org/uploads/default/original/2X/2/26f88b4c59807433d377352f0d15c3db4bf8bd15.jpeg)

---

<div class="post-metadata">

**Author:** ![bonnietwin](https://community.ipfire.org/user_avatar/community.ipfire.org/bonnietwin/32/12350_2.png) [@bonnietwin](https://community.ipfire.org/u/bonnietwin)\
**Post date:** [20 January 2022 08:44 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/31 "2022-01-20T08:44:46Z")

</div>

Sorry I missed that the routing table was in one of your screenshots but it has raised a question.

In the command line screenshot it shows the gateway as 108.172.108.1  
but in your wui routing table it shows the gateway as 108.180.60.1

On my system both show the same results, which is what I would expect.

Is the wui still showing 108.180.60.1 or has it changed to 108.172.108.1

I would not expect the gateway to be changing from one time to another. Mine has been fixed since I started with this isp.

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [20 January 2022 15:52 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/32 "2022-01-20T15:52:28Z")

</div>

That’s because I already restarted the appliance many times. And the WAN is basically dhcp.

---

<div class="post-metadata">

**Author:** ![bonnietwin](https://community.ipfire.org/user_avatar/community.ipfire.org/bonnietwin/32/12350_2.png) [@bonnietwin](https://community.ipfire.org/u/bonnietwin)\
**Post date:** [20 January 2022 16:06 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/33 "2022-01-20T16:06:31Z")

</div>

I would expect your ipfire ip to change when you reboot but not the isp’s gateway ip.

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [20 January 2022 16:55 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/34 "2022-01-20T16:55:04Z")

</div>

The gateway it does change. Depending on the ip address that they assigned.

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [20 January 2022 16:56 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/35 "2022-01-20T16:56:28Z")

</div>

> [@bonnietwin](#):
>
> Is the wui still showing 108.180.60.1 or has it changed to 108.172.108.1

Yes it changed also to the correct gateway and within the subnet of the ip address.

---

<div class="post-metadata">

**Author:** ![linuxgeek](https://community.ipfire.org/user_avatar/community.ipfire.org/linuxgeek/32/8282_2.png) [@linuxgeek](https://community.ipfire.org/u/linuxgeek)\
**Post date:** [11 May 2022 16:07 UTC](https://community.ipfire.org/t/dns-server-status-broken/7056/36 "2022-05-11T16:07:52Z")

</div>

I am wondering if anyone else here who is in Canada, British columbia using ipfire and have Telus as the isp.

[Previous page](https://community.ipfire.org/t/dns-server-status-broken/7056.md?page=1)
