# Latest **URL:** https://community.ipfire.org/latest.md?page=104 [Latest](https://community.ipfire.org/latest.md) · [Categories](https://community.ipfire.org/categories.md) **Page:** 105 --- ## [Squid process anomaly](https://community.ipfire.org/t/squid-process-anomaly/9309)
**Author:** [@sky7176](https://community.ipfire.org/u/sky7176)\ **Replies:** 13\ **Last updated:** [6 February 2023 10:57 UTC](https://community.ipfire.org/t/squid-process-anomaly/9309 "2023-02-06T10:57:23Z")
For some days I’ve noticed that the squid process increases the processes in memory. This leads to the fact that it is difficult to navigate. 172 J1900 core version with 8 Gb of Ram To be able to go back to browsing i… --- ## [Been hours trying... Please help me start a sciprt on boot. rc.local, init.d, rcX.d. cant get any to work. Please](https://community.ipfire.org/t/been-hours-trying-please-help-me-start-a-sciprt-on-boot-rc-local-init-d-rcx-d-cant-get-any-to-work-please/9320)
**Author:** [@tilde88](https://community.ipfire.org/u/tilde88)\ **Replies:** 9\ **Last updated:** [5 February 2023 15:21 UTC](https://community.ipfire.org/t/been-hours-trying-please-help-me-start-a-sciprt-on-boot-rc-local-init-d-rcx-d-cant-get-any-to-work-please/9320 "2023-02-05T15:21:38Z")
It’s just a simple script, just need to run at boot. i dont care about stop, status, reload, restart (and yes, ive made proper scripts with explicit functions, still nothing). init scripts run fine manually, but not at a… --- ## [Fixed: error in 'Etnetera Aggressive Blacklist Rules'](https://community.ipfire.org/t/fixed-error-in-etnetera-aggressive-blacklist-rules/9321)
**Author:** [@mfischer](https://community.ipfire.org/u/mfischer)\ **Replies:** 0\ **Last updated:** [4 February 2023 09:13 UTC](https://community.ipfire.org/t/fixed-error-in-etnetera-aggressive-blacklist-rules/9321 "2023-02-04T09:13:12Z")
FYI: Just in case anybody is/was wondering: There were two errors in the Etnetera Aggressive Blacklist Rules, which caused ‘suricata’ to fail loading two rule lines: \[ERRCODE: SC\_ERR\_INVALID\_SIGNATURE(39)\] - error par… --- ## [DNS lookup fails on response Timeout](https://community.ipfire.org/t/dns-lookup-fails-on-response-timeout/9318)
**Author:** [@benjamin](https://community.ipfire.org/u/benjamin)\ **Replies:** 1\ **Last updated:** [4 February 2023 00:13 UTC](https://community.ipfire.org/t/dns-lookup-fails-on-response-timeout/9318 "2023-02-04T00:13:10Z")
Hi @All, I suddenly have massive problems with the DNS Lokoop. I’ve read some Thrades about similar problems here, but thei are all not exctly the same. But in order: I have in my NEtzwerk an own DNS small DNS resolve… --- ## [\[Core-164\] Alternative lists for URLFilter?](https://community.ipfire.org/t/core-164-alternative-lists-for-urlfilter/7402)
**Author:** [@superslot](https://community.ipfire.org/u/superslot)\ **Replies:** 4\ **Last updated:** [3 February 2023 11:41 UTC](https://community.ipfire.org/t/core-164-alternative-lists-for-urlfilter/7402 "2023-02-03T11:41:58Z")
in the latest release we have dropped few lists and we only have Univ.Toulose by default. is there another list that we could use? is there a possibility to include a service similar to pihole for filtering traffic? t… --- ## [Can I use Certbot on ipfire?](https://community.ipfire.org/t/can-i-use-certbot-on-ipfire/9314)
**Author:** [@philc](https://community.ipfire.org/u/philc)\ **Replies:** 1\ **Last updated:** [2 February 2023 21:00 UTC](https://community.ipfire.org/t/can-i-use-certbot-on-ipfire/9314 "2023-02-02T21:00:53Z")
Hi - dumb question, I know, but… I need to use certbot to manage lets encrypt certs (because I have godaddy, long story). If I install certbot from the CLI and use it, is that a problem? Will it run in the background … --- ## [NAT over NAT is it possible](https://community.ipfire.org/t/nat-over-nat-is-it-possible/1112)
**Author:** [@edegraaff](https://community.ipfire.org/u/edegraaff)\ **Replies:** 1\ **Last updated:** [2 February 2023 09:57 UTC](https://community.ipfire.org/t/nat-over-nat-is-it-possible/1112 "2023-02-02T09:57:52Z")
Hi i want to add ipfire as firewall in front of my home assistant box. The outsite world comes in at port 8000 on my router Traffic to port 8000 is forwarted to the red port of ipfire PI. Is it possible from there to … --- ## [New OpenVPN 2.6.0 Client (Windows 10 64bit) fails to connect](https://community.ipfire.org/t/new-openvpn-2-6-0-client-windows-10-64bit-fails-to-connect/9283)
**Author:** [@dark0ipfire](https://community.ipfire.org/u/dark0ipfire)\ **Replies:** 7\ **Last updated:** [1 February 2023 17:08 UTC](https://community.ipfire.org/t/new-openvpn-2-6-0-client-windows-10-64bit-fails-to-connect/9283 "2023-02-01T17:08:45Z")
Brand new Community OpenVPN client Version 2.6.0 (Community Downloads | OpenVPN) fails to connect and shows these related messages in log, whereas previous Version 2.5.8 connected flawlessly, - any ideas/suggestions from… --- ## [OVPN not working outside from mobile](https://community.ipfire.org/t/ovpn-not-working-outside-from-mobile/9276)
**Author:** [@vincenzo](https://community.ipfire.org/u/vincenzo)\ **Replies:** 33\ **Last updated:** [31 January 2023 13:11 UTC](https://community.ipfire.org/t/ovpn-not-working-outside-from-mobile/9276 "2023-01-31T13:11:33Z")
Hi this is my current setup: internet - Fritx Box router - RPI3 with IPFire (red on 192.168.1.200) I created the OpenVPN server, putting in Global Settings - “Local VPN Hostname/IP” field: 192.168.1.200 Then: I cre… --- ## [DNS-TLS Reverse Lookup Fails](https://community.ipfire.org/t/dns-tls-reverse-lookup-fails/9268)
**Author:** [@eggman](https://community.ipfire.org/u/eggman)\ **Replies:** 2\ **Last updated:** [24 January 2023 16:39 UTC](https://community.ipfire.org/t/dns-tls-reverse-lookup-fails/9268 "2023-01-24T16:39:11Z")
I have tried adding most of the DNS over TLS servers to my list to test them and had reverse lookup fails with four of them: both Flokinet’s RO and NL servers, Freifunk, and Xfinity. Anyone else with this same experience… --- ## [How is IPfire connected?](https://community.ipfire.org/t/how-is-ipfire-connected/9297)
**Author:** [@barcodemaker](https://community.ipfire.org/u/barcodemaker)\ **Replies:** 1\ **Last updated:** [30 January 2023 10:27 UTC](https://community.ipfire.org/t/how-is-ipfire-connected/9297 "2023-01-30T10:27:26Z")
How IP fire will be connected to the router. --- ## [Why is IPv6 disabled by default in IPFire?](https://community.ipfire.org/t/why-is-ipv6-disabled-by-default-in-ipfire/9296)
**Author:** [@tradelabelsoftware](https://community.ipfire.org/u/tradelabelsoftware)\ **Replies:** 1\ **Last updated:** [30 January 2023 11:30 UTC](https://community.ipfire.org/t/why-is-ipv6-disabled-by-default-in-ipfire/9296 "2023-01-30T11:30:23Z")
Why is IPv6 disabled by default in IPFire. can someone explain to me. --- ## [Please help for setup - 2x red, 2 external routers](https://community.ipfire.org/t/please-help-for-setup-2x-red-2-external-routers/9286)
**Author:** [@ronny-m](https://community.ipfire.org/u/ronny-m)\ **Replies:** 1\ **Last updated:** [30 January 2023 16:49 UTC](https://community.ipfire.org/t/please-help-for-setup-2x-red-2-external-routers/9286 "2023-01-30T16:49:48Z")
Hallo Ihr, ich möchte gerne IPFire fürs Routing meines Netzwerkes nutzen. Ich bin nicht ganz unerfahren, was IPFire angeht, stehe aber vor folgendem Problem: von 2 Routern, hiervon einmal LTE, sollen die Zugänge, über … --- ## [Networking suggestion](https://community.ipfire.org/t/networking-suggestion/5259)
**Author:** [@attilay2k](https://community.ipfire.org/u/attilay2k)\ **Replies:** 26\ **Last updated:** [28 April 2021 08:02 UTC](https://community.ipfire.org/t/networking-suggestion/5259 "2021-04-28T08:02:19Z")
Hi everyone, I’m new so I apologize in advance if any concept of how IPFire works is not clear to me I have a complex home network, with a router (192.168.x.1) and a managed switch (192.168.x.4) that serves a dozen VLAN… --- ## [Release 171 bug fixes, AX88179 issue](https://community.ipfire.org/t/release-171-bug-fixes-ax88179-issue/8847)
**Author:** [@gian](https://community.ipfire.org/u/gian)\ **Replies:** 6\ **Last updated:** [30 January 2023 05:11 UTC](https://community.ipfire.org/t/release-171-bug-fixes-ax88179-issue/8847 "2023-01-30T05:11:33Z")
Hello, when I upgraded to 170, I lost my green interface, ASIX Electronics Corp. AX88179 Gigabit Ethernet, and had to revert to 169. Now I wonder if that issue was fixed with 171, and it is safe to move on. Thanks for… --- ## [OpenWrt AP in blue Network](https://community.ipfire.org/t/openwrt-ap-in-blue-network/9291)
**Author:** [@herby](https://community.ipfire.org/u/herby)\ **Replies:** 4\ **Last updated:** [29 January 2023 19:57 UTC](https://community.ipfire.org/t/openwrt-ap-in-blue-network/9291 "2023-01-29T19:57:17Z")
I have installed / Upgraded to OpenWrt 22.03 on a TP-Link TL-WR1043ND v1 I followed the instructions from here https://openwrt.org/docs/guide-user/network/wifi/dumbap in the section “Configuration via LuCI, the OpenWrt… --- ## [Green0 is stuck at 100Mbps, ethtool will not change the speed](https://community.ipfire.org/t/green0-is-stuck-at-100mbps-ethtool-will-not-change-the-speed/9290)
**Author:** [@cuphi](https://community.ipfire.org/u/cuphi)\ **Replies:** 2\ **Last updated:** [29 January 2023 19:50 UTC](https://community.ipfire.org/t/green0-is-stuck-at-100mbps-ethtool-will-not-change-the-speed/9290 "2023-01-29T19:50:50Z")
As the title says, I cannot increase the speed of the network interface green0. \[root@bouncer ~\]# ethtool green0 Settings for green0: Supported ports: \[ TP \] Supported link modes: 100baseT/Full … --- ## [QoS tuning in a HTTPS world](https://community.ipfire.org/t/qos-tuning-in-a-https-world/9288)
**Author:** [@hvacguy](https://community.ipfire.org/u/hvacguy)\ **Replies:** 0\ **Last updated:** [29 January 2023 13:41 UTC](https://community.ipfire.org/t/qos-tuning-in-a-https-world/9288 "2023-01-29T13:41:13Z")
Any suggestions for improving my QoS setup? It is working OK. Web browsing during times of Congestion can be slow with is a trade off for everything else. Hard to isolate / prioritize traffic types when the whole wor… --- ## [NUT server from ipfire appliance](https://community.ipfire.org/t/nut-server-from-ipfire-appliance/9284)
**Author:** [@philc](https://community.ipfire.org/u/philc)\ **Replies:** 3\ **Last updated:** [29 January 2023 13:37 UTC](https://community.ipfire.org/t/nut-server-from-ipfire-appliance/9284 "2023-01-29T13:37:25Z")
Hi. I’m setting up my ipfire appliance, and I’ve got networking, interfaces, etc. all set up and running. Hooray! Now on to the more complicated stuff… I want my ipfire appliance to be the server for NUT, broadcasting… --- ## [Internet is accessible even with MAC filtering firewall rules](https://community.ipfire.org/t/internet-is-accessible-even-with-mac-filtering-firewall-rules/9279)
**Author:** [@josin](https://community.ipfire.org/u/josin)\ **Replies:** 6\ **Last updated:** [28 January 2023 10:23 UTC](https://community.ipfire.org/t/internet-is-accessible-even-with-mac-filtering-firewall-rules/9279 "2023-01-28T10:23:29Z")
We have enabled MAC address filtering using Network groups. Two groups, namely ‘Departments’ and ‘Faculty’ are given internet access. All other access is blocked using firewall rules. Default firewall behaviour is als… --- ## [Suddenly, ports 222, 444 are closed](https://community.ipfire.org/t/suddenly-ports-222-444-are-closed/9256)
**Author:** [@gian](https://community.ipfire.org/u/gian)\ **Replies:** 3\ **Last updated:** [28 January 2023 10:23 UTC](https://community.ipfire.org/t/suddenly-ports-222-444-are-closed/9256 "2023-01-28T10:23:22Z")
Hello All, I used to monitor this host remotely on port 444, but now I can’t reach it anymore. SSH is closed too. What can have gone wrong? I am the only one who has access. I have done a first check on AnyDesk with … --- ## [Display for APU2C4](https://community.ipfire.org/t/display-for-apu2c4/9281)
**Author:** [@goerdi](https://community.ipfire.org/u/goerdi)\ **Replies:** 6\ **Last updated:** [27 January 2023 14:38 UTC](https://community.ipfire.org/t/display-for-apu2c4/9281 "2023-01-27T14:38:33Z")
Hi ! My router is an apu2c4 which has no graphical hardware interface … I remember in the beginning of it there were things like a serial terminal available (a display with serial port and a keyboard) i guess this is … --- ## [German section?](https://community.ipfire.org/t/german-section/67)
**Author:** [@hellfire](https://community.ipfire.org/u/hellfire)\ **Replies:** 11\ **Last updated:** [27 January 2023 11:22 UTC](https://community.ipfire.org/t/german-section/67 "2023-01-27T11:22:39Z")
Maybe already discussed elsewhere, but are there plans for a German speaking category? Sometimes it is difficult expressing this or that in English, hence it would be useful to have such a category, too. Perhaps with su… --- ## [Almost there with OpenVPN RW setup](https://community.ipfire.org/t/almost-there-with-openvpn-rw-setup/9236)
**Author:** [@gian](https://community.ipfire.org/u/gian)\ **Replies:** 10\ **Last updated:** [27 January 2023 10:46 UTC](https://community.ipfire.org/t/almost-there-with-openvpn-rw-setup/9236 "2023-01-27T10:46:35Z")
Ok, so I prepared a RW connection on Ipfire 2.27.172, dowloaded the files .ovpn, .key, .p12 to my laptop running Ubuntu 22.04, and tested the connection with: sudo openvpn --client --config /etc/openvpn/client/desktopcl… --- ## [Read-only system notice on cli](https://community.ipfire.org/t/read-only-system-notice-on-cli/9278)
**Author:** [@fantomduck](https://community.ipfire.org/u/fantomduck)\ **Replies:** 3\ **Last updated:** [26 January 2023 16:31 UTC](https://community.ipfire.org/t/read-only-system-notice-on-cli/9278 "2023-01-26T16:31:50Z")
Hi, Recently i installed the 64bit version and restored the backup from a 32bit installation on the same hardware. Everything works fine. I tried to have a look on the graphs and it says that they are built for another … --- ## [Getting timeouts after upgrade to 172](https://community.ipfire.org/t/getting-timeouts-after-upgrade-to-172/9275)
**Author:** [@nixit](https://community.ipfire.org/u/nixit)\ **Replies:** 4\ **Last updated:** [26 January 2023 10:19 UTC](https://community.ipfire.org/t/getting-timeouts-after-upgrade-to-172/9275 "2023-01-26T10:19:07Z")
hello all, I recently upgrade to core 172, and since upgrading I’ve noticed while browsing I am getting random “webpage timeout” errors. I would hit refresh and a couple seconds later the website would load. this has h… --- ## [Help with DROP\_CTINVALID errors being logged](https://community.ipfire.org/t/help-with-drop-ctinvalid-errors-being-logged/9265)
**Author:** [@retroisbest](https://community.ipfire.org/u/retroisbest)\ **Replies:** 15\ **Last updated:** [25 January 2023 10:51 UTC](https://community.ipfire.org/t/help-with-drop-ctinvalid-errors-being-logged/9265 "2023-01-25T10:51:52Z")
Hi there, We are using IPFIRE (ver. 172) as a dhcp server implementing a proxy.pac to forward any webtraffic to our web filter. In general this works really well, We have started to use Papercut Mobility Client which r… --- ## [Unusual user "nobody" home directory](https://community.ipfire.org/t/unusual-user-nobody-home-directory/9267)
**Author:** [@instincttolu](https://community.ipfire.org/u/instincttolu)\ **Replies:** 4\ **Last updated:** [24 January 2023 17:13 UTC](https://community.ipfire.org/t/unusual-user-nobody-home-directory/9267 "2023-01-24T17:13:02Z")
Hi all, Please could someone explain this. While doing regular identity checks on my ipfire installation, I noticed that my user “nobody” as a home directory “/home/nobody”. Is this normal for an Ipfire installation? or… --- ## [Since upgrade to 172 the graphs have not been working](https://community.ipfire.org/t/since-upgrade-to-172-the-graphs-have-not-been-working/9269)
**Author:** [@instincttolu](https://community.ipfire.org/u/instincttolu)\ **Replies:** 1\ **Last updated:** [24 January 2023 16:47 UTC](https://community.ipfire.org/t/since-upgrade-to-172-the-graphs-have-not-been-working/9269 "2023-01-24T16:47:54Z")
Hi all, Since my upgrade to 172, the status graphs have stopped working, is someone else experiencing this and how did you resolve it? Cheers! --- ## [Copying DHCP table from older core to latest](https://community.ipfire.org/t/copying-dhcp-table-from-older-core-to-latest/9170)
**Author:** [@eggman](https://community.ipfire.org/u/eggman)\ **Replies:** 3\ **Last updated:** [24 January 2023 15:42 UTC](https://community.ipfire.org/t/copying-dhcp-table-from-older-core-to-latest/9170 "2023-01-24T15:42:15Z")
I’m building a new box and want a fresh install of the latest, stable core, but I’d like to copy the DHCP table from an older version. Is there a safe/preferred way to do this? [Previous page](https://community.ipfire.org/latest.md?page=103) [Next page](https://community.ipfire.org/latest.md?page=105)