# Routing

**URL:** https://community.ipfire.org/c/network/routing/22.md?page=1

[Latest](https://community.ipfire.org/latest.md) · [Categories](https://community.ipfire.org/categories.md)

**Page:** 2

---

## [Ipfire without dhcp server](https://community.ipfire.org/t/ipfire-without-dhcp-server/7068)

<div class="topic-metadata">

**Author:** [@tgriksas](https://community.ipfire.org/u/tgriksas)\
**Replies:** 5\
**Last updated:** [20 January 2022 12:31 UTC](https://community.ipfire.org/t/ipfire-without-dhcp-server/7068 "2022-01-20T12:31:52Z")

</div>

Hi, I have a windows server (domaion controller) which also works as a dhcp server. How to configure ipfire so that it will only run internet on the server but not as a dhcp server. I have a network: modem - ipfire - ser…

---

## [Ipfire green dhcp add static ip](https://community.ipfire.org/t/ipfire-green-dhcp-add-static-ip/7012)

<div class="topic-metadata">

**Author:** [@tgriksas](https://community.ipfire.org/u/tgriksas)\
**Replies:** 6\
**Last updated:** [19 January 2022 02:00 UTC](https://community.ipfire.org/t/ipfire-green-dhcp-add-static-ip/7012 "2022-01-19T02:00:35Z")

</div>

Hi, how to put a static IP on a green dhcp network. I have a server that has the address 192.168.0.222

---

## [Web access can ping from computer but not the other way around](https://community.ipfire.org/t/web-access-can-ping-from-computer-but-not-the-other-way-around/7038)

<div class="topic-metadata">

**Author:** [@phamd4](https://community.ipfire.org/u/phamd4)\
**Replies:** 5\
**Last updated:** [17 January 2022 05:40 UTC](https://community.ipfire.org/t/web-access-can-ping-from-computer-but-not-the-other-way-around/7038 "2022-01-17T05:40:07Z")

</div>

Hello guys, I"m new here, I apologize if my question has been answered but I’ve been looking over google and the forum but I couldn’t find anything that could help me. I found something similar but the solution still di…

---

## [Different static routes for green/blue network](https://community.ipfire.org/t/different-static-routes-for-green-blue-network/6477)

<div class="topic-metadata">

**Author:** [@baruch234](https://community.ipfire.org/u/baruch234)\
**Replies:** 5\
**Last updated:** [19 October 2021 09:35 UTC](https://community.ipfire.org/t/different-static-routes-for-green-blue-network/6477 "2021-10-19T09:35:09Z")

</div>

We need to define different static routes for green and blue network in order to reach the same target network (over different VPN tunnels). A simple static route doesn’t solve this, because it tries to route all traffic…

---

## [Static Routes, Default Gateways and OpenVPN](https://community.ipfire.org/t/static-routes-default-gateways-and-openvpn/6341)

<div class="topic-metadata">

**Author:** [@istjatoll](https://community.ipfire.org/u/istjatoll)\
**Replies:** 8\
**Last updated:** [11 October 2021 04:01 UTC](https://community.ipfire.org/t/static-routes-default-gateways-and-openvpn/6341 "2021-10-11T04:01:00Z")

</div>

Hello, we have 2 IPFire , both with VPN. A + B. Same network. If the default GW of the Windows-PC, used for RDP, is the same that is used for incomming VPN everything is fine. VPN and GW for the PC are for example A. …

---

## [Pakfire no updates with PPP setting "VDSL "](https://community.ipfire.org/t/pakfire-no-updates-with-ppp-setting-vdsl/6130)

<div class="topic-metadata">

**Author:** [@pic18f2550](https://community.ipfire.org/u/pic18f2550)\
**Replies:** 7\
**Last updated:** [25 August 2021 15:43 UTC](https://community.ipfire.org/t/pakfire-no-updates-with-ppp-setting-vdsl/6130 "2021-08-25T15:43:48Z")

</div>

Hello, the IPFire 2.25 (i586) - Core Update 158 was previously running RED on a DSL router with DHCP. There were no problems here. 3 days ago I switched from DSL to fiber. The converter supplied by the provider deliv…

---

## [Static route to subnet](https://community.ipfire.org/t/static-route-to-subnet/5966)

<div class="topic-metadata">

**Author:** [@adwordsmac](https://community.ipfire.org/u/adwordsmac)\
**Replies:** 5\
**Last updated:** [24 August 2021 12:21 UTC](https://community.ipfire.org/t/static-route-to-subnet/5966 "2021-08-24T12:21:07Z")

</div>

hello everyone so i tried the last few days to setup a libvirt host with routed network, so basically a own virtual subnet. In ipfire i setup a static route for the subnet, but unfortunatly it doesnt fully work- i can…

---

## [Internal vpn server and static routes](https://community.ipfire.org/t/internal-vpn-server-and-static-routes/5973)

<div class="topic-metadata">

**Author:** [@feles](https://community.ipfire.org/u/feles)\
**Replies:** 4\
**Last updated:** [5 August 2021 20:16 UTC](https://community.ipfire.org/t/internal-vpn-server-and-static-routes/5973 "2021-08-05T20:16:30Z")

</div>

Hello, I am a little bit stuck with static routes, in this case with an internal openvpn server. I setted up a vpn server in a machine with one nic in my lan and according to openvpn site faq, aside of port forwardin…

---

## [Domain based routing?](https://community.ipfire.org/t/domain-based-routing/5727)

<div class="topic-metadata">

**Author:** [@tlionheart](https://community.ipfire.org/u/tlionheart)\
**Replies:** 3\
**Last updated:** [2 July 2021 10:36 UTC](https://community.ipfire.org/t/domain-based-routing/5727 "2021-07-02T10:36:33Z")

</div>

Hi, I use 4x IPFire firewalls with different internet connections for my network. To access some cloud services (https) via a dedicated internet connection (IPFire-B), I use static routes on my client’s standard gateway…

---

## [One WayTraffic Through IPFire box](https://community.ipfire.org/t/one-waytraffic-through-ipfire-box/4841)

<div class="topic-metadata">

**Author:** [@wb8nbs](https://community.ipfire.org/u/wb8nbs)\
**Replies:** 1\
**Last updated:** [12 March 2021 08:50 UTC](https://community.ipfire.org/t/one-waytraffic-through-ipfire-box/4841 "2021-03-12T08:50:27Z")

</div>

I just upgraded my internet to ATT 100Meg. They installed a BGW-210 router. I want to keep my IPFire box so the wiring is Internet to BGW-210 to IPFire. The ATT box has good WiFi and I can connect to the internet throug…

---

## [Port mapping for Source Connect](https://community.ipfire.org/t/port-mapping-for-source-connect/4462)

<div class="topic-metadata">

**Author:** [@fwallbuilder](https://community.ipfire.org/u/fwallbuilder)\
**Replies:** 1\
**Last updated:** [27 January 2021 17:23 UTC](https://community.ipfire.org/t/port-mapping-for-source-connect/4462 "2021-01-27T17:23:11Z")

</div>

I am having difficulty getting an audio software to work with IPFIRE, it is called Source Connect and it requires incoming ports be open.can anyone help. I assume that I need to create rules I have the client computer …

---

## [Red interface ip (public ip ) and internal subnet ip (public ip) cannot ping each other](https://community.ipfire.org/t/red-interface-ip-public-ip-and-internal-subnet-ip-public-ip-cannot-ping-each-other/4025)

<div class="topic-metadata">

**Author:** [@john-pan](https://community.ipfire.org/u/john-pan)\
**Replies:** 2\
**Last updated:** [14 December 2020 01:18 UTC](https://community.ipfire.org/t/red-interface-ip-public-ip-and-internal-subnet-ip-public-ip-cannot-ping-each-other/4025 "2020-12-14T01:18:13Z")

</div>

Hello, I install ipfireos and configure static ip(public ip) on ipfire 2.25-152，then configure internal network server with subnet and public ip. when test, subnet ip (192.168.9.193) can ping to red interface ip \[public…

---

## [Router behind ipfire (greenzone)](https://community.ipfire.org/t/router-behind-ipfire-greenzone/3958)

<div class="topic-metadata">

**Author:** [@paktongkol](https://community.ipfire.org/u/paktongkol)\
**Replies:** 1\
**Last updated:** [5 December 2020 14:23 UTC](https://community.ipfire.org/t/router-behind-ipfire-greenzone/3958 "2020-12-05T14:23:13Z")

</div>

Greeting guys. I’m gonna setup ipfire to sit between ONT and my TPlink archer router. I’ve seen other setup the greenzone attached with ethernet switch. My setting is red with PPPoE, green static ip, router static …

---

## [Ipfire lose static routes after reboot](https://community.ipfire.org/t/ipfire-lose-static-routes-after-reboot/3702)

<div class="topic-metadata">

**Author:** [@tlionheart](https://community.ipfire.org/u/tlionheart)\
**Replies:** 9\
**Last updated:** [23 November 2020 10:29 UTC](https://community.ipfire.org/t/ipfire-lose-static-routes-after-reboot/3702 "2020-11-23T10:29:07Z")

</div>

Hello, I’m using 8x IPFires (Version 2.25 (i586) - Core Update 14) to connect different locations / subnets with OpenVPN. For this I configuried different static routes on every IPFire. These static routes normaly worki…

---

## [I´d like to have an IPAD network](https://community.ipfire.org/t/i-d-like-to-have-an-ipad-network/3758)

<div class="topic-metadata">

**Author:** [@alternativende](https://community.ipfire.org/u/alternativende)\
**Replies:** 8\
**Last updated:** [16 November 2020 15:45 UTC](https://community.ipfire.org/t/i-d-like-to-have-an-ipad-network/3758 "2020-11-16T15:45:01Z")

</div>

Hello community, i have a few IPFire´s here in a few schools which are getting a lot of mobile devices these days. For those devices i need a second and maybe a third subnet to have enough free IP addresses. Here is m…

---

## [DNAT error (masquerade IP)](https://community.ipfire.org/t/dnat-error-masquerade-ip/3468)

<div class="topic-metadata">

**Author:** [@maxime](https://community.ipfire.org/u/maxime)\
**Replies:** 0\
**Last updated:** [15 October 2020 10:55 UTC](https://community.ipfire.org/t/dnat-error-masquerade-ip/3468 "2020-10-15T10:55:40Z")

</div>

Hello I find myself completely stuck on with DNAT rules. Indeed I have several aliases on my IPFire with multiple public IP addresses and each of these addresses (therefore aliases) have rules that redirect to each mach…

---

## [How are libloc databases made?](https://community.ipfire.org/t/how-are-libloc-databases-made/2963)

<div class="topic-metadata">

**Author:** [@thecross](https://community.ipfire.org/u/thecross)\
**Replies:** 2\
**Last updated:** [9 August 2020 19:17 UTC](https://community.ipfire.org/t/how-are-libloc-databases-made/2963 "2020-08-09T19:17:18Z")

</div>

Hello, Congratulations for releasing libloc as an alternative to GeoIP. I would like to write an article about it on LinuxFr. It’s one of the main French free software community website were articles are written by deve…

---

## [Can´t reach my server behind the IPfire](https://community.ipfire.org/t/can-t-reach-my-server-behind-the-ipfire/2452)

<div class="topic-metadata">

**Author:** [@ralph](https://community.ipfire.org/u/ralph)\
**Replies:** 12\
**Last updated:** [17 June 2020 15:17 UTC](https://community.ipfire.org/t/can-t-reach-my-server-behind-the-ipfire/2452 "2020-06-17T15:17:28Z")

</div>

IPfire 2.25 (i586) Core Update 144 I have an ISP with a range of IP´s - 217.xxx.xxx.192 - 217.xxx.xxx.198 .193 is the gateway-adress .194 my first useable IP (for the mailserver behind the IPfire) .195 not used/free …

---

## [Configuring IpFire network](https://community.ipfire.org/t/configuring-ipfire-network/2176)

<div class="topic-metadata">

**Author:** [@eulbofo](https://community.ipfire.org/u/eulbofo)\
**Replies:** 4\
**Last updated:** [6 May 2020 09:47 UTC](https://community.ipfire.org/t/configuring-ipfire-network/2176 "2020-05-06T09:47:13Z")

</div>

Hi. So I have this network at home, consisting of a box with internal network address 192.168.0.0/24, both for ethernet and wifi network. Behind this, I have a machine running Ipfire, with my personal network behind : m…

---

## [SNAT on RED fails silently with DHCP](https://community.ipfire.org/t/snat-on-red-fails-silently-with-dhcp/2157)

<div class="topic-metadata">

**Author:** [@erikvl](https://community.ipfire.org/u/erikvl)\
**Replies:** 1\
**Last updated:** [3 May 2020 17:53 UTC](https://community.ipfire.org/t/snat-on-red-fails-silently-with-dhcp/2157 "2020-05-03T17:53:17Z")

</div>

I was playing around with some routed networks and in order to allow one of them access to the internet, I added a static route to its gateway and added a source nat rule for that network. Like this: I was surprise…

---

## [\[Feature Request\] Static routing and used interface](https://community.ipfire.org/t/feature-request-static-routing-and-used-interface/1594)

<div class="topic-metadata">

**Author:** [@theunicornxxl](https://community.ipfire.org/u/theunicornxxl)\
**Replies:** 4\
**Last updated:** [16 March 2020 12:24 UTC](https://community.ipfire.org/t/feature-request-static-routing-and-used-interface/1594 "2020-03-16T12:24:22Z")

</div>

At the moment IPFire detects the needed interface for a static routing automatically. Sometime that’s bad… What about an optional filed for the interface at the “Static Routes” menu? Is this possible?

---

## [Routing with several network with GREEN ORANGE and RED](https://community.ipfire.org/t/routing-with-several-network-with-green-orange-and-red/1144)

<div class="topic-metadata">

**Author:** [@frickeldave](https://community.ipfire.org/u/frickeldave)\
**Replies:** 2\
**Last updated:** [4 February 2020 19:11 UTC](https://community.ipfire.org/t/routing-with-several-network-with-green-orange-and-red/1144 "2020-02-04T19:11:04Z")

</div>

Hi, i have created the two networks “dog” and “msg”. The red boxes at the left side are ipfire systems. The msg-ipfire-system is connected to the dog-network with the orange network interface. Now i want to communicate …

---

## [Static Routing?](https://community.ipfire.org/t/static-routing/825)

<div class="topic-metadata">

**Author:** [@fpausp](https://community.ipfire.org/u/fpausp)\
**Replies:** 3\
**Last updated:** [19 January 2020 16:51 UTC](https://community.ipfire.org/t/static-routing/825 "2020-01-19T16:51:56Z")

</div>

I like to use IPFire in a doctors office. There is a Cisco Router and E-Card Reader… you can take a look on the map: I can ping the E-Card Reader (192.168.0.252) and the GINA-Box (with a static route) from the IPFire …

---

## [Troubles with port proxy from RED to GREEN](https://community.ipfire.org/t/troubles-with-port-proxy-from-red-to-green/515)

<div class="topic-metadata">

**Author:** [@linken](https://community.ipfire.org/u/linken)\
**Replies:** 5\
**Last updated:** [6 January 2020 20:19 UTC](https://community.ipfire.org/t/troubles-with-port-proxy-from-red-to-green/515 "2020-01-06T20:19:45Z")

</div>

I am having issues with the a simple port 80 proxy to internal green server. I attached image showing the rule, total rules which are very few, logs and the proof that the internal web server is healthy. Followed the p…

---

## [Route distance on IPSec](https://community.ipfire.org/t/route-distance-on-ipsec/849)

<div class="topic-metadata">

**Author:** [@celeruk](https://community.ipfire.org/u/celeruk)\
**Replies:** 0\
**Last updated:** [6 January 2020 19:26 UTC](https://community.ipfire.org/t/route-distance-on-ipsec/849 "2020-01-06T19:26:47Z")

</div>

Hi, how can I set the route distance on the static and/or VPN route? I have the central IPSec VPN hub with 10/16 and 10/24 on the green that vanishes after connect.

---

## [Firewall rule(win server -\> ipfire -\>web server)](https://community.ipfire.org/t/firewall-rule-win-server-ipfire-web-server/322)

<div class="topic-metadata">

**Author:** [@dbajameschoi](https://community.ipfire.org/u/dbajameschoi)\
**Replies:** 2\
**Last updated:** [20 November 2019 19:02 UTC](https://community.ipfire.org/t/firewall-rule-win-server-ipfire-web-server/322 "2019-11-20T19:02:20Z")

</div>

Hello, I’m a CS student studying IPfire and testing to access from host windows server to vm web server through vm IPfire. Would you help me to set up the firewall rule? I’ve tried it to but can’t access the web site. My…

[Previous page](https://community.ipfire.org/c/network/routing/22.md)
