# Monitoring **URL:** https://community.ipfire.org/c/add-ons/monitoring/23.md?page=1 [Latest](https://community.ipfire.org/latest.md) · [Categories](https://community.ipfire.org/categories.md) **Page:** 2 --- ## [Collecting logs with service like Sumo Logic](https://community.ipfire.org/t/collecting-logs-with-service-like-sumo-logic/10279)
**Author:** [@dbinott](https://community.ipfire.org/u/dbinott)\ **Replies:** 1\ **Last updated:** [3 September 2023 13:43 UTC](https://community.ipfire.org/t/collecting-logs-with-service-like-sumo-logic/10279 "2023-09-03T13:43:15Z")
Is this possible? An agent gets installed on the box. --- ## [Pmacct - "Unknown key: interface" , "no such column: vlan\_in"](https://community.ipfire.org/t/pmacct-unknown-key-interface-no-such-column-vlan-in/9947)
**Author:** [@tphz](https://community.ipfire.org/u/tphz)\ **Replies:** 73\ **Last updated:** [13 August 2023 22:38 UTC](https://community.ipfire.org/t/pmacct-unknown-key-interface-no-such-column-vlan-in/9947 "2023-08-13T22:38:05Z")
I am trying to configure pmacct but after installation I get the following error. WARN: \[/etc/pmacct/pmacct.conf:9\] Unknown key: interface. Ignored. After reboot and after command /etc/init.d/pmacct restart The … --- ## [Pmacct: Memory WARN messages](https://community.ipfire.org/t/pmacct-memory-warn-messages/9962)
**Author:** [@jon](https://community.ipfire.org/u/jon)\ **Replies:** 12\ **Last updated:** [3 July 2023 08:16 UTC](https://community.ipfire.org/t/pmacct-memory-warn-messages/9962 "2023-07-03T08:16:36Z")
Continuing the discussion from Pmacct - "Unknown key: interface" , "no such column: vlan\_in": @tphz, @ummeegge, and everyone else! Has anyone run into these memory WARN messages related to pmacct? I see LOTS of these… --- ## [\[Core-164\] Alternative lists for URLFilter?](https://community.ipfire.org/t/core-164-alternative-lists-for-urlfilter/7402)
**Author:** [@superslot](https://community.ipfire.org/u/superslot)\ **Replies:** 4\ **Last updated:** [3 February 2023 11:41 UTC](https://community.ipfire.org/t/core-164-alternative-lists-for-urlfilter/7402 "2023-02-03T11:41:58Z")
in the latest release we have dropped few lists and we only have Univ.Toulose by default. is there another list that we could use? is there a possibility to include a service similar to pihole for filtering traffic? t… --- ## [Icinga HTTP service CRITICAL](https://community.ipfire.org/t/icinga-http-service-critical/8802)
**Author:** [@maintech](https://community.ipfire.org/u/maintech)\ **Replies:** 2\ **Last updated:** [27 October 2022 15:16 UTC](https://community.ipfire.org/t/icinga-http-service-critical/8802 "2022-10-27T15:16:55Z")
After installing and running icinga I have 1 major error showing up. “connect to address 127.0.0.1 and port 80: Connection refused”. This should be an easy fix but for some reason I can’t find the cause. Firewall?? If an… --- ## [Apcupsd & email](https://community.ipfire.org/t/apcupsd-email/6320)
**Author:** [@pic18f2550](https://community.ipfire.org/u/pic18f2550)\ **Replies:** 12\ **Last updated:** [24 July 2022 14:45 UTC](https://community.ipfire.org/t/apcupsd-email/6320 "2022-07-24T14:45:54Z")
Hello, I would like to know how I can get the apcupsd to send me an email in case of network failure. The webinterface consists only of one entry under Packfire and one entry under Status Information. An extra window … --- ## [Troubleshooting Monit Email alerts](https://community.ipfire.org/t/troubleshooting-monit-email-alerts/7845)
**Author:** [@trish](https://community.ipfire.org/u/trish)\ **Replies:** 8\ **Last updated:** [6 May 2022 17:29 UTC](https://community.ipfire.org/t/troubleshooting-monit-email-alerts/7845 "2022-05-06T17:29:45Z")
Is monit still capable of email alerts? I setup mail service in System-Mailservice, and I get test emails I even get APC-UPS alerts with email. For some unknown reason, I can’t get Monit to send emails. I set it up in… --- ## [Core 167 Update SARG rebuilds](https://community.ipfire.org/t/core-167-update-sarg-rebuilds/7836)
**Author:** [@hellfire](https://community.ipfire.org/u/hellfire)\ **Replies:** 21\ **Last updated:** [4 May 2022 18:27 UTC](https://community.ipfire.org/t/core-167-update-sarg-rebuilds/7836 "2022-05-04T18:27:08Z")
Hi! Just upgraded from core 159 to 167, I had to re-add an option to SARG configuration and would like to rebuild the daily SARG reports. So far I’ve used this command: /usr/sbin/update-sarg-reports daily Right now… --- ## [Using NUT with Ipfire](https://community.ipfire.org/t/using-nut-with-ipfire/6777)
**Author:** [@trish](https://community.ipfire.org/u/trish)\ **Replies:** 19\ **Last updated:** [2 February 2022 03:44 UTC](https://community.ipfire.org/t/using-nut-with-ipfire/6777 "2022-02-02T03:44:22Z")
I understand there is no WUI for the NUT addon. I am having trouble monitoring my Cyberpower UPS. It is straight forward, USB A to B cable connects CyberPower → IPfire. I installed NUT with pakfire, IPFire 2.27 (x86\_… --- ## [Qemu-guest-agent for ProxMox](https://community.ipfire.org/t/qemu-guest-agent-for-proxmox/458)
**Author:** [@waltersantos](https://community.ipfire.org/u/waltersantos)\ **Replies:** 7\ **Last updated:** [24 February 2020 15:16 UTC](https://community.ipfire.org/t/qemu-guest-agent-for-proxmox/458 "2020-02-24T15:16:34Z")
Hello. I would like to know how to install the qemu-guest-agent for Proxmox on IPFire? Thanks in advance! --- ## [Nut & Synology Server DS212se](https://community.ipfire.org/t/nut-synology-server-ds212se/6351)
**Author:** [@pic18f2550](https://community.ipfire.org/u/pic18f2550)\ **Replies:** 3\ **Last updated:** [30 September 2021 09:35 UTC](https://community.ipfire.org/t/nut-synology-server-ds212se/6351 "2021-09-30T09:35:54Z")
Nut is only on it once. what now. There is no surface for the time being. → wiki.ipfire.org - Network UPS Tools (NUT) --- ## [Apcupsd & Synology](https://community.ipfire.org/t/apcupsd-synology/6339)
**Author:** [@pic18f2550](https://community.ipfire.org/u/pic18f2550)\ **Replies:** 5\ **Last updated:** [29 September 2021 08:06 UTC](https://community.ipfire.org/t/apcupsd-synology/6339 "2021-09-29T08:06:26Z")
Hello, I’m trying to get a Synology (DS216se with DSM 6.2.4-25556 Update 2) to access Apcupsd on blue. Something is stuck in the understanding. The UPS is connected to the IPFire via USB and works as it should. green … --- ## [Pmacct - A lightweight passive network monitoring tool](https://community.ipfire.org/t/pmacct-a-lightweight-passive-network-monitoring-tool/47)
**Author:** [@ummeegge](https://community.ipfire.org/u/ummeegge)\ **Replies:** 33\ **Last updated:** [24 June 2021 22:35 UTC](https://community.ipfire.org/t/pmacct-a-lightweight-passive-network-monitoring-tool/47 "2021-06-24T22:35:10Z")
Hello community, since a couple of years now i use Pmacct --\> http://www.pmacct.net/ which seems to me as a nice tool for network management tasks like billing, live or historical traffic trends analysis, real-time aler… --- ## [Log summary since latest release empty + syslog contains only ntp events](https://community.ipfire.org/t/log-summary-since-latest-release-empty-syslog-contains-only-ntp-events/4959)
**Author:** [@adminpg](https://community.ipfire.org/u/adminpg)\ **Replies:** 1\ **Last updated:** [19 April 2021 06:16 UTC](https://community.ipfire.org/t/log-summary-since-latest-release-empty-syslog-contains-only-ntp-events/4959 "2021-04-19T06:16:33Z")
Hello! Since the last update my ipfire log summary is empty. If I hit export I get: \*\*\* Error: There is no logfile defined. Do you have a /etc/logwatch/conf/logfiles/secure.conf file ? Moreover in the System Events I … --- ## [Ntopng Installer Script: missing shared object](https://community.ipfire.org/t/ntopng-installer-script-missing-shared-object/2556)
**Author:** [@throttled](https://community.ipfire.org/u/throttled)\ **Replies:** 8\ **Last updated:** [18 April 2021 05:53 UTC](https://community.ipfire.org/t/ntopng-installer-script-missing-shared-object/2556 "2021-04-18T05:53:14Z")
Greetings! New IPFire user here. I’m trying to get ntopng working via the installation script provided by @ummeegge (which is awesome, thanks so much for your work on this!) For reference, I’m following the instructio… --- ## [Looking for help with RRDtool on IPFire](https://community.ipfire.org/t/looking-for-help-with-rrdtool-on-ipfire/4972)
**Author:** [@jon](https://community.ipfire.org/u/jon)\ **Replies:** 4\ **Last updated:** [24 March 2021 16:25 UTC](https://community.ipfire.org/t/looking-for-help-with-rrdtool-on-ipfire/4972 "2021-03-24T16:25:49Z")
Hello! For the past few month I’ve been working with pmacct on IPFire. And I’d like to figure out if I can transfer the data collected via pmacct and graph it via RRDtool. Are there any RRDtool users that are willing … --- ## [Rkhunter as IPFire AddOn?](https://community.ipfire.org/t/rkhunter-as-ipfire-addon/4950)
**Author:** [@mrichtsfeld](https://community.ipfire.org/u/mrichtsfeld)\ **Replies:** 7\ **Last updated:** [22 March 2021 13:48 UTC](https://community.ipfire.org/t/rkhunter-as-ipfire-addon/4950 "2021-03-22T13:48:24Z")
Hi, First, thanks for the amazing work you do with IPFire. I have a question regarding hardening IPFire. One of the tools I use on other systems is rkhunter. I also found this description wiki.ipfire\[dot\]org/optimizati… --- ## [StatusMAIL Issue](https://community.ipfire.org/t/statusmail-issue/4587)
**Author:** [@roberto](https://community.ipfire.org/u/roberto)\ **Replies:** 3\ **Last updated:** [21 February 2021 05:39 UTC](https://community.ipfire.org/t/statusmail-issue/4587 "2021-02-21T05:39:25Z")
Hi. I have detected a problem with the StatusMAIL Addon. I will explain it. On some IPFires, not all, if the “Intrusion Prevention System - Alerts” option is checked, the process is blocked and no mail is sent. The onl… --- ## [How to audit visited pages with Squid Proxy/URL Filter](https://community.ipfire.org/t/how-to-audit-visited-pages-with-squid-proxy-url-filter/4003)
**Author:** [@roberto](https://community.ipfire.org/u/roberto)\ **Replies:** 10\ **Last updated:** [17 December 2020 18:35 UTC](https://community.ipfire.org/t/how-to-audit-visited-pages-with-squid-proxy-url-filter/4003 "2020-12-17T18:35:39Z")
Hello everyone. Any help is welcome. How could it be possible to audit which pages Users browse to without blocking them?. Doing it through Squid, it gives a lot of raw data but not by categories which is the interest… --- ## [Log Analytics Agent](https://community.ipfire.org/t/log-analytics-agent/3899)
**Author:** [@philost](https://community.ipfire.org/u/philost)\ **Replies:** 1\ **Last updated:** [28 November 2020 09:33 UTC](https://community.ipfire.org/t/log-analytics-agent/3899 "2020-11-28T09:33:42Z")
Firstly, thank you thank you thank you for all the hard work you do on IPFire. Have you considered bundling the Microsoft Monitoring Agent aka Log Analytics Agent as a pak package? I’d love to get my logs into Log Analy… --- ## [Check\_mk\_agent - after Core 142 removed](https://community.ipfire.org/t/check-mk-agent-after-core-142-removed/1446)
**Author:** [@pablo78](https://community.ipfire.org/u/pablo78)\ **Replies:** 8\ **Last updated:** [20 November 2020 22:55 UTC](https://community.ipfire.org/t/check-mk-agent-after-core-142-removed/1446 "2020-11-20T22:55:07Z")
Too bad that check\_mk\_agent is no longer possible from Core 142 on check-mk\_agent --- ## [Who is online =\> only not active or no status](https://community.ipfire.org/t/who-is-online-only-not-active-or-no-status/3504)
**Author:** [@goerdi](https://community.ipfire.org/u/goerdi)\ **Replies:** 14\ **Last updated:** [23 October 2020 14:16 UTC](https://community.ipfire.org/t/who-is-online-only-not-active-or-no-status/3504 "2020-10-23T14:16:33Z")
Hi ! I added some clients in my network, but some are makred as no status and some aire marked as inkativ… bute they are all online and pingable from ipfire i’m on core 150… Ciao Gerd --- ## [Problems Connecting IPFire with Remote Logging Server](https://community.ipfire.org/t/problems-connecting-ipfire-with-remote-logging-server/2531)
**Author:** [@afathurizki](https://community.ipfire.org/u/afathurizki)\ **Replies:** 0\ **Last updated:** [15 June 2020 06:59 UTC](https://community.ipfire.org/t/problems-connecting-ipfire-with-remote-logging-server/2531 "2020-06-15T06:59:04Z")
I encountered a problem while doing remote logging with syslog on IPFire. Here is the thing that I have done on IPFire: Enter the syslog server IP address for remote logging under Logs -\> Log Settings then press save. … --- ## [Core 142 - check\_mk\_agent removed](https://community.ipfire.org/t/core-142-check-mk-agent-removed/1428)
**Author:** [@pablo78](https://community.ipfire.org/u/pablo78)\ **Replies:** 9\ **Last updated:** [26 May 2020 18:34 UTC](https://community.ipfire.org/t/core-142-check-mk-agent-removed/1428 "2020-05-26T18:34:48Z")
Hello, everybody. Unfortunately I had to hear that starting with Core 142 the package check\_mk\_agent is no longer offered and removed from the system. I was able to monitor the router with this package from my check\_mk … --- ## [Ntopng - licensed version](https://community.ipfire.org/t/ntopng-licensed-version/2187)
**Author:** [@vkykam](https://community.ipfire.org/u/vkykam)\ **Replies:** 1\ **Last updated:** [6 May 2020 10:04 UTC](https://community.ipfire.org/t/ntopng-licensed-version/2187 "2020-05-06T10:04:04Z")
Hi, First, a big thanks to ummeegge for getting ntopng scripted for IPFire. A question… Since we are a non-profit, we were able to get a free license for ntopng so that we can set up monitoring by user and to create r… --- ## [Proxy Accounting](https://community.ipfire.org/t/proxy-accounting/2101)
**Author:** [@pandaman](https://community.ipfire.org/u/pandaman)\ **Replies:** 0\ **Last updated:** [29 April 2020 07:48 UTC](https://community.ipfire.org/t/proxy-accounting/2101 "2020-04-29T07:48:37Z")
I use proxy accounting to account for how much data each user uses each month. It works well. 1 problem I have: You can easily see how much data is being used in the current month. You can easily see how much data h… --- ## [NUT GUI in IPFire](https://community.ipfire.org/t/nut-gui-in-ipfire/1440)
**Author:** [@whitetiger](https://community.ipfire.org/u/whitetiger)\ **Replies:** 3\ **Last updated:** [27 April 2020 12:13 UTC](https://community.ipfire.org/t/nut-gui-in-ipfire/1440 "2020-04-27T12:13:39Z")
Is there in IPFire a GUI for NUT? --- ## [Nrpe... Not running](https://community.ipfire.org/t/nrpe-not-running/1690)
**Author:** [@pablo78](https://community.ipfire.org/u/pablo78)\ **Replies:** 5\ **Last updated:** [8 April 2020 10:36 UTC](https://community.ipfire.org/t/nrpe-not-running/1690 "2020-04-08T10:36:11Z")
Hello,everybody, i am trying to get the package nagios\_nrpe (nagios-plugins) up and running as the check\_mk-agent has unfortunately been removed from core 142. I have installed both packages and also xinetd and edited … --- ## [Newbie with Zabbix](https://community.ipfire.org/t/newbie-with-zabbix/1852)
**Author:** [@roberto](https://community.ipfire.org/u/roberto)\ **Replies:** 1\ **Last updated:** [8 April 2020 09:11 UTC](https://community.ipfire.org/t/newbie-with-zabbix/1852 "2020-04-08T09:11:15Z")
Hi. I have created a Docker on a Raspberry 4 with 4Gb of ram and through Portainer I have installed the Zabbix Appliance but I do not know how to proceed. I have installed the Zabbix Addon on my IPFire but it is not re… --- ## [Pmacct - Restart IPFire issue](https://community.ipfire.org/t/pmacct-restart-ipfire-issue/452)
**Author:** [@hellfire](https://community.ipfire.org/u/hellfire)\ **Replies:** 7\ **Last updated:** [28 March 2020 10:00 UTC](https://community.ipfire.org/t/pmacct-restart-ipfire-issue/452 "2020-03-28T10:00:55Z")
Hi, just updated IPFire to core 138 and notice that after the boot up, pmacctd did not start again. Of course I’ve checked option “boot” in menu services, however, I guess the error can be found within the logs: Nov 2… [Previous page](https://community.ipfire.org/c/add-ons/monitoring/23.md) [Next page](https://community.ipfire.org/c/add-ons/monitoring/23.md?page=2)